Cel The proposed project tackles a CfP from the JTI-GRA ITD. Is focuses on the experimental optimization of a regional aircraft configuration and a subsequent optimization of take-off/ landing configuration. The regional aircraft has a wing designed for natural laminar flow, fuselage-mounted engines and a T-tail. Open configurational questions that are addressed tackle wing-tip devices and their performance, engine positions as well as tail-plane position and settings. In order to account for the fuselage-mounted engine the model will include a working propulsion system designed to fit the real engines. This first test-phase focuses on the configurational questions, the second test-phase tackles the optimization of the HLD-devices by testing different configurations.Therefore apart from the modular aircraft configuration the different control surfaces, HLD devices used for assessing the landing-configuration and stability and control issues for the different configurations will include actuators to allow continuous setting and fast wind-tunnel tests. Pressure tubes, sensors and a balance system to measure engine thrust will be introduced into the aircraft model, too.The consortium for this proposal consists of 5 partners which were chosen according to their experience in different fields needed in this proposal. The consortium is well balanced, including SMEs, University and Industry.The work proposed in this proposal covers the total design, including solutions for actuators, propulsion system, the manufacturing of the model, its Ground-Vibration-Test and the Wind-Tunnel Test as well as the final subsequent modifications needed to operate the model in subsequent tests as required in the CfP. Thus the work is structured in four different work-package, dealing with Management, Design & Manufacturing, Tests and Final Modifications. Dziedzina nauki engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraftengineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensors Program(-y) FP7-JTI - Specific Programme "Cooperation": Joint Technology Initiatives Temat(-y) JTI-CS-2012-2-GRA-05-007 - Development & optimization of advanced propulsion system installation through innovative complete A/C powered WT model Zaproszenie do składania wniosków SP1-JTI-CS-2012-02 Zobacz inne projekty w ramach tego zaproszenia System finansowania JTI-CS - Joint Technology Initiatives - Clean Sky Koordynator IBK-INNOVATION GMBH & CO. KG Wkład UE € 771 041,69 Adres BUTENDEICHSWEG 2 21129 Hamburg Niemcy Zobacz na mapie Region Hamburg Hamburg Hamburg Rodzaj działalności Private for-profit entities (excluding Higher or Secondary Education Establishments) Kontakt administracyjny Stephan Adden (Dr.) Linki Kontakt z organizacją Opens in new window Strona internetowa Opens in new window Koszt całkowity Brak danych Uczestnicy (4) Sortuj alfabetycznie Sortuj według wkładu UE Rozwiń wszystko Zwiń wszystko UNIVERSITY OF BRISTOL Zjednoczone Królestwo Wkład UE € 183 000,45 Adres BEACON HOUSE QUEENS ROAD BS8 1QU Bristol Zobacz na mapie Region South West (England) Gloucestershire, Wiltshire and Bristol/Bath area Bristol, City of Rodzaj działalności Higher or Secondary Education Establishments Kontakt administracyjny Julie Coombs (Mrs.) Linki Kontakt z organizacją Opens in new window Strona internetowa Opens in new window Koszt całkowity Brak danych REVOIND INDUSTRIALE Zakończenie uczestnictwa Włochy Wkład UE € 433 485,94 Adres VIA CASALE MARCANGELI 13 67063 ORICOLA Zobacz na mapie Rodzaj działalności Private for-profit entities (excluding Higher or Secondary Education Establishments) Kontakt administracyjny Cesare Servadio (Mr.) Linki Kontakt z organizacją Opens in new window Strona internetowa Opens in new window Koszt całkowity Brak danych RUAG Schweiz AG Szwajcaria Wkład UE € 154 767,00 Adres Seetalstrasse 175 6032 Emmen Zobacz na mapie Region Schweiz/Suisse/Svizzera Zentralschweiz Luzern Rodzaj działalności Private for-profit entities (excluding Higher or Secondary Education Establishments) Kontakt administracyjny Andreas Hauser (Mr.) Linki Kontakt z organizacją Opens in new window Strona internetowa Opens in new window Koszt całkowity Brak danych EUROTECH DI MARIO AMOROSO SAS Włochy Wkład UE € 329 430,00 Adres Via Luigi Mercantini 23 IS 8 80125 Napoli Zobacz na mapie Region Sud Campania Napoli Rodzaj działalności Private for-profit entities (excluding Higher or Secondary Education Establishments) Kontakt administracyjny Amoroso Francesco Linki Kontakt z organizacją Opens in new window Strona internetowa Opens in new window Koszt całkowity Brak danych