ATTESIProject reference: 277975
Funded under :
Active Flow Control Technique on Trailing Edge Shroud for Improved High Lift Configurations
Total cost:EUR 459 780,6
EU contribution:EUR 344 834
Topic(s):JTI-CS-2010-4-SFWA-01-013 - Active Flow Control (AFC) techniques on trailing edge shroud for improved high lift configurations - design, manufacture and tests
Call for proposal:SP1-JTI-CS-2010-04See other projects for this call
Funding scheme:JTI-CS - Joint Technology Initiatives - Clean Sky
"The subject of the proposed project ATTESI is the design and evaluation of flow control techniques to improve the separation behavior on a drooped spoiler configuration.
The proposed project comprehends numerical evaluation and optimization of the spoiler droop together with different flow control approaches applied upstream of the kink (the effect of the droop) and at the trailing edge of the spoiler. The techniques are the application of fluidic vortex generator jets (VGJs) upstream of the kink and a fluidic gurney (FG) at the trailing edge of the spoiler. The two AFC-techniques will be able to operate both in static and in pulsed (dynamic) mode.
The pulsed VGJs will be designed in a two-step-procedure using state-of-the-art numerical tools to generate a validation dataset and experience the basic sensitivities. Further design and optimization will be performed based on a statistical model. The fluidic gurney will be applied at the lower side of the trailing edge. It will be designed within a numerical optimization loop together with the spoiler droop angle.
The numerical analysis will be accompanied by experimental work that will be conducted in the 1.3m-windtunnel at TU-BS up to Reynolds numbers of 2 Mio. The VGJs as well as the fluidic gurney will be integrated into a drooped spoiler model of an airfoil model with DLR-F15 contour.
The proposed project will cover the elaboration of a structural model for the drooped spoiler consisting of a “smart surface”, which enables to droop the spoiler while remaining a smooth surface. The structural design will be based on finite element analysis and will be continued within the project to a demonstrator model for the smart surface.
The results will be analyzed with respect to effectiveness, efficiency and towards swept wings."
EU contribution: EUR 145 991
Tel.: +49 531 3912971
Fax: +49 531 3915952
EU contribution: EUR 13 767,98
Tel.: +49 911 393560
EU contribution: EUR 99 375
164 90 STOCKHOLM
EU contribution: EUR 85 700,02
REHDORFER STRASSE 4
Tel.: +49 40 572 28836