Objective
Compressed hydrogen trailers are cost efficient for near term distribution. However, with the currently used 20 MPa trailers the supply of larger refuelling stations would result in multiple truck deliveries per day, which is often not acceptable. In order to increase the transported quantities, lighter materials and higher pressure must be adopted. The cost increase of the hydrogen trailers resulting from advanced technology can be off-set by the distribution cost savings from increased truck capacity.
This project will assess the effects that can be achieved by the introduction of high capacity trailers composed of composite tanks with respect to weight, safety, energy efficiency and greenhouse gas emissions.
Transport of compressed hydrogen today is strictly regulated by international and regional regulations. New materials and product capacities available today have the potential to increase the payload of a single trailer from about 350 kg hydrogen today to more than 1000 kg. Materialising this potential is therefore of great importance for the efficient distribution of hydrogen to refuelling stations with high throughput. This will require changes to existing Regulations, Codes and Standards (RCS) in particular for proof pressures higher than 65 MPa and tubes larger than 3000 litres. Adopting these changes is a time consuming process and will only happen if authorities are convinced that the necessary safety precautions are taken care of to achieve a level of safety at least as high as observed with today’s distribution technologies for hydrogen.
The proposed project will address these challenges by means of a detailed assessment of safety, environmental and techno-economic impacts of the use of higher capacity trailers and subsequently by the development of a preliminary action plan leading to a Roadmap for the required RCS amendments, which will be communicated to the authorities in charge.
Programme(s)
Multi-annual funding programmes that define the EU’s priorities for research and innovation.
Multi-annual funding programmes that define the EU’s priorities for research and innovation.
Topic(s)
Calls for proposals are divided into topics. A topic defines a specific subject or area for which applicants can submit proposals. The description of a topic comprises its specific scope and the expected impact of the funded project.
Calls for proposals are divided into topics. A topic defines a specific subject or area for which applicants can submit proposals. The description of a topic comprises its specific scope and the expected impact of the funded project.
Call for proposal
Procedure for inviting applicants to submit project proposals, with the aim of receiving EU funding.
Procedure for inviting applicants to submit project proposals, with the aim of receiving EU funding.
FCH-JU-2010-1
See other projects for this call
Funding Scheme
Funding scheme (or “Type of Action”) inside a programme with common features. It specifies: the scope of what is funded; the reimbursement rate; specific evaluation criteria to qualify for funding; and the use of simplified forms of costs like lump sums.
Funding scheme (or “Type of Action”) inside a programme with common features. It specifies: the scope of what is funded; the reimbursement rate; specific evaluation criteria to qualify for funding; and the use of simplified forms of costs like lump sums.
JTI-CP-FCH - Joint Technology Initiatives - Collaborative Project (FCH)
Coordinator
85521 Ottobrunn
Germany
The total costs incurred by this organisation to participate in the project, including direct and indirect costs. This amount is a subset of the overall project budget.