Objetivo "A huge effort has been dedicated to improving the performance of aircraft propellers, as well as of aerodynamics surfaces, having in mind the maximization of the overall efficiency and reduction of the fuel consumption.In that sense, blade morphing technologies have become a must for long term developments. In meanwhile, however, the effects of several smaller changes have been investigated with very good preliminary results, such as, Gurney flaps and other trailing edges.In this project, Active Space Technologies (AST) proposes to develop a new concept of an Active Gurney Flap (AGF) in collaboration with the Green Rotorcraft Consortium (GRC1). The project scope is the complete design and manufacturing of the controller, actuator and Gurney flap mechanism, which will be assembled in a set of four scaled model helicopter blade and tested in a wind tunnel. The AGF system must be compliant with a set of challenging system requirements related with the actuation frequency (60Hz), the required maximum deployed extension (3% of the blade chord), the limited available room at the flap location (about 1.5 mm) and the Gurney flap movement perpendicular to the blade surface." Ámbito científico engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraftrotorcraftengineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaeronautical engineeringengineering and technologyenvironmental engineeringenergy and fuels Programa(s) FP7-JTI - Specific Programme "Cooperation": Joint Technology Initiatives Tema(s) JTI-CS-2011-2-GRC-01-007 - Gurney flap actuator, mechanism and control electronics for a Model scale helicopter rotor blade (Develop and supply the actuation system for integration into the active model rotor blade) Convocatoria de propuestas SP1-JTI-CS-2011-02 Consulte otros proyectos de esta convocatoria Régimen de financiación JTI-CS - Joint Technology Initiatives - Clean Sky Coordinador Active Space Technologies, Actividades Aeroespaciais S.A. Aportación de la UE € 202 422,50 Dirección PARQUE INDUSTRIAL DE TAVEIRO LOTE 12 3045 508 COIMBRA Portugal Ver en el mapa Región Continente Centro (PT) Região de Coimbra Tipo de actividad Private for-profit entities (excluding Higher or Secondary Education Establishments) Contacto administrativo Abel Mendes (Mr.) Enlaces Contactar con la organización Opens in new window Sitio web Opens in new window Coste total Sin datos