HiReLFProject reference: 323452
Funded under :
Transonic High Reynolds Number Testing of a Large Laminar Wing Half Model
Total cost:EUR 1 199 972
EU contribution:EUR 899 979
Topic(s):JTI-CS-2012-1-SFWA-02-027 - Transonic High Reynolds Number Testing of a Large Laminar Wing Half Model
Call for proposal:SP1-JTI-CS-2012-01See other projects for this call
Funding scheme:JTI-CS - Joint Technology Initiatives - Clean Sky
The main objective of the present proposal is the performance of wind tunnel testing of a half model at transonic speed and near flight Reynolds number. The model wing featuring a natural laminar flow (NLF) design will be subject to artificially generated surface steps and imperfections allowing investigating the resulting effect on the flow behaviour on the wing. The proposed activities comprise the design and provision of a controlled high pressure air supply inside the model, the model preparation and the test performance. Basic investigations on NLF wings have already been performed in a recently completed EU research project ensuring the availability of test capabilities, tools and appropriate techniques for an achievement of the defined objectives. Forces and moments will be measured with a classical strain gauge balance inside the tunnel ceiling while the PSI system is going to record the large amount of tap based pressure data. Model deformation in wing twist and bending due to aero loads will be monitored by the highly qualified stereo pattern tracking system. The visualization of laminar flow areas as well as the transition line will be achieved by applying the temperature sensitive paint (TSP) technique, which has been developed and enhanced by DLR and ETW to a mature state over the recent decade. A team of long experienced and highly skilled staff will take the responsibility for a successful performance of the described activities.
To meet concerns of the given complexity of the work an extended risk assessment with corresponding contingency plans has been prepared. Exploitation and an enhanced dissemination address the uniqueness of the expected results.
The proposed investigations on a Natural Laminar Flow model refer to a key technology stream within the SFWA programme contributing to achieving the technology readiness level 6, thus supporting the realization of the Vision 2020 goals of the European Union.
EU contribution: EUR 899 979
ERNST MACH STRASSE
Tel.: +49 2203 609159
Fax: +49 2203 609124