Skip to main content
italianoIT
European Commission logo print header

Pilot-scale hybrid roll to roll/sheet to sheet manufacturing chain for flexible OLEDs

Descrizione del progetto


Manufacturing solutions for new ICT products
Pilot-scale hybrid roll to roll/sheet to sheet manufacturing chain for flexible OLEDs

Organic Electroluminescence (OLED) is the most promising technology to deliver flexible, thin, light weight, power efficient and environment-friendly light sources. Currently glass based OLED devices are slowly entering the market place, opening new possibilities for lighting solutions. By adding flexibility and robustness at a lower price point, flexible OLEDs will change the lighting industry and revolution the way we all experience lighting.
The introduction of flexible OLED lighting is hampered by a lack of reliable series production technologies, flexible OLEDs exist in the lab but not yet in the fab. Roll-to-roll (R2R) manufacturing of these devices is seen by many as the future cost-efficient manufacturing technology for flexible OLEDs. However, complete roll to roll manufacturing of flexible OLED is still years away and will not be able to bring flexible OLEDs to the market place within 10 years.
The overall objective of the Flex-o-Fab project is the demonstration of a reliable manufacturing process for OLED lighting foils enabling market introduction within 3 years after the end of the project.
Flex-o-Fab will take existing technologies in use for the manufacturing of glass based bottom emissive small molecule OLEDs and use these as a basis to develop a pilot series manufacturing process for flexible OLEDs. By doing so, the project will be allowed to focus on the roadblocks and bridge the gap between sheet-to-sheet (S2S) produced glass OLEDs and the future envisioned complete R2R lighting foils.
Flex-o-Fab will strengthen and expand the leading position of the European lighting industry by making the shift from lab to fab and make flexible OLED devices an industrial reality. Furthermore, the new sustainable disruptive technologies will create long-term European manufacturing jobs due to their high degree of technical novelty and specialization. Finally, the intellectual property generated will protect these advances from Asian and US competition.

Campo scientifico

Programma(i)

Argomento(i)

Invito a presentare proposte

FP7-2012-NMP-ICT-FoF
Vedi altri progetti per questo bando

Meccanismo di finanziamento

CP - Collaborative project (generic)

Contatti coordinatore

Flora LI Dr.

Coordinatore

NEDERLANDSE ORGANISATIE VOOR TOEGEPAST NATUURWETENSCHAPPELIJK ONDERZOEK TNO
Contributo UE
€ 1 838 248,00
Indirizzo
ANNA VAN BUERENPLEIN 1
2595 DA Den Haag
Paesi Bassi

Mostra sulla mappa
Regione
West-Nederland Zuid-Holland Agglomeratie ’s-Gravenhage
Tipo di attività
Research Organisations
Contatto amministrativo
Date Moet (Dr.)
Collegamenti
Costo totale
Nessun dato

Partecipanti (13)

Condividi questa pagina

Scarica

Ultimo aggiornamento: 22 Aprile 2017

Il mio booklet

Permalink: https://cordis.europa.eu/project/id/314362/it

European Union, 2024