JIF4FLIGHTProject reference: 298114
Funded under :
Final Assembly Line Assembly Jigs and Fixtures for flight test demonstrator
Total cost:EUR 1 999 320
EU contribution:EUR 1 049 610
Topic(s):JTI-CS-2011-2-SFWA-03-009 - Final Assembly Line Assembly Jigs and Fixtures for flight test demonstrator
Call for proposal:SP1-JTI-CS-2011-02See other projects for this call
Funding scheme:JTI-CS - Joint Technology Initiatives - Clean Sky
The objective of JIF4FLIGHT proposal it to conduct the development, design, manufacture and installation of jig platforms, stagingand operational tooling, plus project tooling for remowing the outer wing sections of an A340-300 and to assembly the SFWA laminar flow flight test demonstrator wings.
The SFWA flight test demonstrator aims to validate that a specific wing profile can sustain laminar flow with an acceptable stability versus in flight deformation and contamination.
The new outer wing sections to be fitted will have a very accurate profile and high smoothness of the wing surface. These boxes will be dry areas (without fuel) and fully functional with Flight Test Instrumentation.
EU contribution: EUR 899 760
C/ Progres 319
08290 CERDANYOLA DEL VALLES
EU contribution: EUR 149 850
AVENIDA UNIVERSITAT AUTONOMA 23
08290 CERDANYOLA DEL VALLES (BARCELONA)