Objective
Carbon nanotubes are materials with a set of unique electrical, mechanical, surface and thermal properties. Yet their adoption in mainstream applications has been limited by mass production and device integration. This project develops the first 300mm wafer-scale equipment for production of carbon nanotubes on surfaces. The project will cover the design, engineering, process control, quality assurance, qualification and process development. It will develop applications in cathodes for time resolved X-ray sources for X-ray tomography, cathodes for high power microwave amplifiers, interconnects for VLSI, thermal management surfaces, low stiction surfaces for micro-fluidic channels and filters, wafer scale fabrication of spin valve devices, and sensor surfaces for integrated sensors on CMOS.
Fields of science (EuroSciVoc)
CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensors
You need to log in or register to use this function
We are sorry... an unexpected error occurred during execution.
You need to be authenticated. Your session might have expired.
Thank you for your feedback.
You will soon receive an email to confirm the submission. If you have selected to be notified about the reporting status, you will also be contacted when the reporting status will change.
Programme(s)
Call for proposal
FP7-NMP-2008-LARGE-2
See other projects for this call
Funding Scheme
CP-IP - Large-scale integrating projectCoordinator
CB2 1TN Cambridge
United Kingdom