Objective
Each member state in the EU-27 now has a legally binding 2020 target related to the share of renewable energy in their final energy consumption. The most commonly available renewable energy sources are hydro, biomass, PV, CSP, Wind, Geothermal & Wave power. Of these wind is increasingly becoming cost competitive and the cost of wind turbines are dropping as volumes increase. This proposal deals with distributed energy production by small to medium wind turbines in the 10kW-100kW range, used immediately close to the point of power production
Wind energy conversion is a long standing process that has been employed for hundreds of years, but it is complicated and difficult to capture the maximum possible amount of power at any given point in time. The amount of power output from a WECS depends upon the accuracy with which the peak power points are tracked by the MPPT controller of the WECS control system regardless of the generator type.
For any wind turbine the maximum point of the power curve occurs at a particular rotor speed for a given wind speed. Even a small variation from this rotor speed will cause a significant decrease in the power extracted from the wind. Rotor speed, for a given wind speed, is dependent upon generator loading as well as the fluctuation in the wind speed. Power extraction strategies assess the wind conditions and then introduce control actions to adjust the turbine’s rotational speed so that it will operate at the turbine’s highest aerodynamic efficiency. Conversion strategies that have not been optimised can lead to significant wasted wind energy.
There have been many attempts to achieve maximum power point tracking (MPPT) algorithms but these have not been successfully translated from academic studies to reliable working industrial implementations in our power range. The focus of this project is to produce an industrial solution that works reliably and can be employed without needing expert users.
Fields of science (EuroSciVoc)
CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: The European Science Vocabulary.
CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: The European Science Vocabulary.
- engineering and technology environmental engineering energy and fuels renewable energy hydroelectricity marine energy wave power
- engineering and technology environmental engineering energy and fuels renewable energy wind energy
- agricultural sciences agricultural biotechnology biomass
- engineering and technology environmental engineering energy and fuels energy conversion
You need to log in or register to use this function
We are sorry... an unexpected error occurred during execution.
You need to be authenticated. Your session might have expired.
Thank you for your feedback. You will soon receive an email to confirm the submission. If you have selected to be notified about the reporting status, you will also be contacted when the reporting status will change.
Programme(s)
Multi-annual funding programmes that define the EU’s priorities for research and innovation.
Multi-annual funding programmes that define the EU’s priorities for research and innovation.
Topic(s)
Calls for proposals are divided into topics. A topic defines a specific subject or area for which applicants can submit proposals. The description of a topic comprises its specific scope and the expected impact of the funded project.
Calls for proposals are divided into topics. A topic defines a specific subject or area for which applicants can submit proposals. The description of a topic comprises its specific scope and the expected impact of the funded project.
Call for proposal
Procedure for inviting applicants to submit project proposals, with the aim of receiving EU funding.
Procedure for inviting applicants to submit project proposals, with the aim of receiving EU funding.
FP7-SME-2012
See other projects for this call
Funding Scheme
Funding scheme (or “Type of Action”) inside a programme with common features. It specifies: the scope of what is funded; the reimbursement rate; specific evaluation criteria to qualify for funding; and the use of simplified forms of costs like lump sums.
Funding scheme (or “Type of Action”) inside a programme with common features. It specifies: the scope of what is funded; the reimbursement rate; specific evaluation criteria to qualify for funding; and the use of simplified forms of costs like lump sums.
Coordinator
LE13 0PB MELTON MOWBRAY
United Kingdom
The total costs incurred by this organisation to participate in the project, including direct and indirect costs. This amount is a subset of the overall project budget.