Skip to main content
European Commission logo print header

Development of a mobile Pico-projector based data Displaying solution for Construction SMEs enabling the “paperless construction site”

Objectif

This project will:
• Provide a rugged and robust pico-projector based solution for the construction industry to enable a “paperless construction site”.
• Allow easy drawing and other construction related documents to be displayed at construction site.
• Support the growth of European ICT and construction industry SMEs.

The need:
• The “paperless construction site” is currently very far from reality and there is no reliable and easy-to-use affordable solution to replace printed drawings and other construction related documents on construction sites

The general goal of the PicoDiCon project is to create a paperless on-line solution for construction workers to easily display up-to-date 2D and 3D drawings and other construction related materials on site. There is currently no user-friendly and reliable technical solution for replacing printed materials in construction sites by electronic information.

To achieve this goal we will develop a rugged and robust pico-projector and PDA based solution for the construction industry to enable a “paperless construction site”. Our solution will enable the display drawings and other construction related documents on-line on construction site without need for large and expensive ruggedized PC’s and extending current PDA’s limited display area. It will be an easy to use, reliable and affordable solution for construction SMEs, who can project image on any flat surface on construction sites. Our consortium represents 9 participants from 5 EU countries

To achieve this we need to:
• Develop a pico-projector engine by using the DeCIBEL™ (US patent approved in March 2008) laser platform which allows us to develop small MEMS head(<2cm3 for embedding into PDA’s), low-power (<15W), high quality (WVGA, 16M colours) and affordable (Bill of Materials €100 per projector engine) pico-projector prototype suitable for portable ruggedized devices

Appel à propositions

FP7-SME-2008-1
Voir d’autres projets de cet appel

Régime de financement

BSG-SME - Research for SMEs

Coordinateur

EPICRYSTALS OY
Contribution de l’UE
€ 491 834,00
Adresse
Insinöörinkatu 41
33270 TAMPERE
Finlande

Voir sur la carte

Type d’activité
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Contact administratif
Tomi Jouhti (Dr.)
Liens
Coût total
Aucune donnée

Participants (9)