SNRPBBEARINGProject reference: 326023
Funded under :
NTN-SNR Proposal for Propellers Blades Bearings Design and Manufacturing
Total cost:EUR 1 497 817,6
EU contribution:EUR 748 908,8
Call for proposal:SP1-JTI-CS-2012-02See other projects for this call
Funding scheme:JTI-CS - Joint Technology Initiatives - Clean Sky
NTN-SNR is a major supplier for the propellers blade bearing. That is why NTN-SNR answers to this topic of call 12. The global strategy of the project is divided into 4 major tasks which constitute the work packages of the project (WP2 to WP5) and one work package is dedicated to the management (WP1). This project will be led according to NTN-SNR usual development process for new products or R&D projects.
The goal of NTN-SNR proposal is to meet the topic manager requirements. The Propellers Blades bearings will be designed, manufactured and tested (component tests are required necessary to demonstrate the behaviour with different loads cases – TRL 5 is required ) to withstand the radial load of the propeller blade load in operating condition due centrifugal forces and unbalance loads, to withstand axial and tangential loads due to aerodynamic forces on the blade and to withstand to the high temperatures.
The global coordination of the project will be of the responsibility of the aerospace R&D project leader. The aerospace R&D project leader will be the focal point for the topic manager. He will be responsible for the time schedule and for the success of the project.
The bearing designs will be performed by NTN-SNR Aerospace design office using its knowledge and its experience on this type of application and so innovative solutions will be implemented in these bearings.
The bearings will be manufactured according to the NTN-SNR quality process, the certified standard process and the flight test safety requirements. The industrial validation report will be delivered with the bearings.
To reduce the risks linked to the chosen concepts, several specific tests will be performed by the NTN-SNR test centre and by the material laboratory and by specialised vibratory.
Due to current activity, NTN-SNR has the knowledge and the experience in design, manufacturing, testing, in certification of aircraft engine bearings and in test bench design and modification.
EU contribution: EUR 748 908,8
RUE DES USINES 1 ANNECY
Tel.: +33 4 50659453