Cel "This proposal is to design and manufacture an innovative shield to protect critical components of an aircraft against high velocity shrapnel from an engine burst.The concept of the shield design is based on in house modelling capabilities of Imperial consultant to use different fibres acting as membranes through the thickness of the ballistic structure. In addition to this, these fibre layers are interlaced by foam to provide optimum performance. This use of almost dry layers within foam sub-laminates will be investigated at the modeling stage. The specific polymer used will depend heavily on the temperature requirements as well as other aircraft integration constraints and hence will be subject to more detailed discussions. The manufacturing is provisionally done by press with matrix film layers. The specific matrix used will again subject to the temperature requirements.The proposal has come from a close collaboration between the Imperial College Consultants and Swerea SICOMP. It is therefore the result of the combined skills in manufacturing structural composites for the defence and aeronautical industry as well as specific ballistic design skills. Both institutes have the necessary skills, experience and equipment to design and manufacture a successful shield. As both these institutes are non profit research establishments actively working to advance composite technology, the materials and techniques have been chosen based on the type of treat and the aircraft integration constraints and there is no constrain to use any one particular material supplier. Publishing and dissemination of the results is also not a problem if so desired." Dziedzina nauki engineering and technologymaterials engineeringcompositesengineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraftnatural scienceschemical sciencespolymer sciencesengineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaeronautical engineering Program(-y) FP7-JTI - Specific Programme "Cooperation": Joint Technology Initiatives Temat(-y) JTI-CS-2011-1-SFWA-02-014 - Design and manufacturing of an innovative shield - C Zaproszenie do składania wniosków SP1-JTI-CS-2011-01 Zobacz inne projekty w ramach tego zaproszenia System finansowania JTI-CS - Joint Technology Initiatives - Clean Sky Koordynator RISE SICOMP AB Wkład UE € 67 499,00 Adres FIBERVAEGEN 2 - OEJEBYN 941 26 Pitea Szwecja Zobacz na mapie Region Norra Sverige Övre Norrland Norrbottens län Rodzaj działalności Research Organisations Kontakt administracyjny Kenneth Strand (Mr.) Linki Kontakt z organizacją Opens in new window Strona internetowa Opens in new window Koszt całkowity Brak danych