DESIGN AND DEVELOPMENT OF A COMBUSTOR TO UTILISE WDF OF A HIGH EFFICIENCY LEVEL.

Projektinformationen

ID Finanzhilfevereinbarung: RU1*0077

Startdatum 30 April 1983

Enddatum 30 Oktober 1983

Finanziert unter

• Research and development programme (EEC) in the raw materials sector, 1982-1985

Gesamtkosten € 0,00

EU-Beitrag Keine Daten

Koordiniert durch

Easiburn
United Kingdom

Ziel

THE RESEARCH AND DEVELOPMENT WILL RELATE TO FOUR MAIN CONSIDERATIONS:
A) THE DESIGN OF A COMBUSTION CHAMBER WILL TAKE INTO CONSIDERATION THE VOLATILE NATURE AND ASH CONTENT OF THE FUEL, WITH A GRATE SYSTEM WHICH WILL, BY AGITATION OF THE FUEL AND BY A MECHANISM OF INTIMATE COMBUSTION AIR MIXTURE WITH THE VOLATILE GASSES, PRODUCE A HIGH LEVEL EFFICIENCY.
B) THE DESIGN AN AIR HEAT EXCHANGER WHICH WILL OPERATE AT A HIGH LEVEL OF EFFICIENCY AND BE CAPABLE OF HEATING 150 CU. METRES OF ATMOSPHERIC AIR PER MINUTE TO A TEMPERATURE OF 350 DEGRES CENTIGRADE AND BE RESISTANT TO FLUE DUST FOULING.
C) THE DESIGN OF A WDF METERING FEEDER TO CHARGE THE COMBUSTION CHAMBER AT A CONTINUOUSLY VARIABLE RATE.
D) THE DESIGN OF AN AUTOMATIC CONTROL MECHANISM WHICH WILL PERMIT THE COMBUSTION EQUIPMENT TO START UP, PROVIDE A CONTINUOUSLY VARIABLE HEAT OUTPUT ACCORDING TO THE NEEDS OF THE WDF PROCESS, AND TO SHUT DOWN AT THE END OF A PRODUCTION SHIFT, WITHOUT MANUAL INVOLVEMENT.

Programm/Programme

• PRE-RAWMAT 2C - Research and development programme (EEC) in the raw materials sector, 1982-1985

Thema/Themen

Data not available

Aufforderung zur Vorschlagseinreichung

Data not available

Finanzierungsplan

Data not available

Koordinator

Easiburn

• EU-Beitrag: Keine Daten
• Adresse: Pelham House ; BN7 Lewes ; Vereinigtes Königreich
• Gesamtkosten: Keine Daten