HIMMOVALProject reference: 620134
Funded under :
High speed metallic material removal under acceptable surface integrity for rotating frame
Total cost:EUR 599 676
EU contribution:EUR 449 757
Topic(s):JTI-CS-2013-1-SAGE-02-033 - High speed metallic material removal under acceptable surface integrity for rotating frame
Call for proposal:SP1-JTI-CS-2013-01See other projects for this call
Funding scheme:JTI-CS - Joint Technology Initiatives - Clean Sky
"The HIMMOVAL project aims to develop a new rapid metal removal concept under acceptable surface integrity for fabricating typical jet engine components made of high resistant super alloys that will be based on smart use of non-conventional machining methods, namely water jet technologies and low plasticity burnishing surface treatment, optimized conventional machining and a well-defined sequence of processes. The concept to be developed will show high productivity, low cost, the capability to create special geometries or cavities and the robustness to be translated to a real production situation. The feasibility of a radical improvement of material removal rate when using conventional machining with defined cutting edges through cryogenic cooling or creative machining strategies will also be explored.
The generated results will enable optimum selection of removal processes together with their parameters under stringent surface integrity requirements for high resistant alloys. Moreover, the rapid removal concept will contribute to deliver the geared open rotor demonstrator technologies addressed within the CSJU SAGE2 project to demonstration.
The HIMMOVAL consortium is integrated by 1 research organisation, 1 university and 1 SME.
EU contribution: EUR 179 589
PARQUE CIENTIFICO Y TECNOLOGICO DE BIZKAIA C GELDO EDIFICIO 700
48160 DERIO BIZKAIA
Tel.: +34 943105115
Fax: +34 946460900
EU contribution: EUR 158 169
BARRIO SARRIENA S N
Fax: +34 946014215
EU contribution: EUR 111 999
ROUTE NATIONALE 5
6041 GOSSELIES CHARLEROI
Tel.: +32 71 257 890
Fax: +32 71 257 894