Objective THE OPTOELECTRONIC SYSTEM CONSISTING OF SOLID STATE (SEMI-CONDUCTOR) CAMERAS AND MICROPROCESSORS IS BEING DESIGNED FOR GRADING WOOD STAVES FROM SURFACE PARAMETERS SUCH AS LENGTH, FORM, CRACKS, KNOTS, WANES, MISCOLOURATIONS, AND OTHERS THE WORK UNTIL NOW HAS BEEN ON: 1. BUILDING TEST JIG FOR MAKING EXPERIMENTS WITH LIGHT AND OPTICS AT FULL SPEED (2 M/SEC.) BASED ON THE STATIC EXPERIMENTS. 2. MAKING SPECTRAL ANALYSIS TO OPTIMIZE OPTICAL FILTER-IN AND TO FIND THE DIFFERENCES IN OPTICAL FILTERING QUOTIENTS. AFTER FINISHING THE TWO ABOVE-MENTIONED TASKS THERE WILL BE A PHASE OF BUILDING UP AN OVERVALL COMPLETE TEST SYSTEM. AFTER FINISHING THIS THERE WILL BE A PHASE OF DESIGNING THE COMPUTER SYSTEM FOR THE GRADING OF 14 PARAMETERS OF THE WOOD STAVES INTO 4 DIFFERENT CLASSES OF FLOOR QUALITIES. Programme(s) PRE-RAWMAT 2C - Research and development programme (EEC) in the raw materials sector, 1982-1985 Topic(s) Data not available Call for proposal Data not available Funding Scheme Data not available Coordinator TEKNOLOGISK INSTITUT EU contribution No data Address GREGERSENSVEJ 2630 Denmark See on map Total cost No data Participants (4) Sort alphabetically Sort by EU Contribution Expand all Collapse all DEPARTMENT OF WOOD-TECHNOLOGY EU contribution No data Address See on map Total cost No data INDUSTRIAL AUTOMATION EU contribution No data Address See on map Total cost No data JUNCKERS INDUSTRIER A/S EU contribution No data Address See on map Total cost No data THEODOR HOHNS KG EU contribution No data Address See on map Total cost No data
