Objetivo TO DEMONSTRATE THE TECHNICAL AND ECONOMICAL FEASIBILITY OF THE PRODUCTION OF VERY THICK PROFILES COEXTRUDED WITH PLASTIC WASTE AND HIGH QUALITY INDUSTRIAL WASTE. THE PROFILES WILL BE COEXTRUDED WITH: INSIDE: A THICK PROFILE OF PLASTICS WASTE OUTSIDE: A FINE SKIN OF VIRGIN POLYMER OR A HIGH QUALITY INDUSTRIAL WASTE THE INSIDE PROFILE CAN BE MADE BY EXTRUSION OR FLOW-MOLDING. THE OUTSIDE SKIN WILL BE COEXTRUDED ENVELOPING THE INSIDE PROFILE. THE ECONOMICAL STUDY OF THIS PROCESS HAS DEMONSTRATED THAT THE PROFILE CAN BE PRODUCED AT 60% THE COST OF THE SAME PROFILE PRODUCED WITH VIRGIN POLYMER BOTH HAVING COMPARABLE MECHANICAL PROPERTIES. THE SKIN-EFFECT OF THE OBTAINED SANDWICH WILL FURTHER BE STUDIED IN TERMS OF MECHANICAL PROPERTIES LIKE STIFFNESS AND IMPACT STRENGHT. CRIF, PLASTICS RESEARCH CENTER AND SA RHEO (FN-SUBSIDIARY) HAVE THE PATENTS AND THE KNOW-HOW REQUIRED TO CONDUCT THIS PROJECT. THEY HAVE IN THE PAST DEMONSTRATED THEIR CAPABILITIES TO PRODUCE, BY INJECTION MOULDING A SIMILAR SANDWICH USING A MIXED PLASTIC WASTE COVERED WITH VIRGIN HDPE AND PP. Ámbito científico natural scienceschemical sciencespolymer sciences Programa(s) FP1-RAWMAT 3C - Research programme (EEC) on materials (raw materials and advanced materials), 1986-1989 Tema(s) Data not available Convocatoria de propuestas Data not available Régimen de financiación CSC - Cost-sharing contracts Coordinador Rheo SA Aportación de la UE Sin datos Dirección 5300 Seilles Bélgica Ver en el mapa Coste total Sin datos Participantes (3) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo CRIF Bélgica Aportación de la UE Sin datos Dirección LIEGE Ver en el mapa Coste total Sin datos F N Bélgica Aportación de la UE Sin datos Dirección HERSTAL Ver en el mapa Coste total Sin datos FAMPLAC-MOLDES IDA Portugal Aportación de la UE Sin datos Dirección MARINHA GRANDE Ver en el mapa Coste total Sin datos
