IMPROVED LEADING EDGES FOR STRIP.

Projektinformationen

ID Finanzhilfevereinbarung: 7210-EA-212

Startdatum 1 Juli 1985

Enddatum 30 Juni 1988

Finanziert unter

• Medium-term orientation (ECSC) "steel research in relation to the General Objectives for Steel", 1981-1985

Gesamtkosten € 0,00

EU-Beitrag Keine Daten

Koordiniert durch

CENTRE DE RECHERCHES METALLURGIQUES
Belgium

Ziel

THE AIM OF THE RESEARCH IS TO IMPROVE THE DIMENSIONAL QUALITY OF THE BUTT-ENDS OF STRIP PRODUCED IN CONTINUOUS HOT-ROLLING MILLS.

TWO ASPECTS OF THE PROBLEM ARE TO BE INVESTIGATED:
- IMPROVEMENT OF THE SHAPE OF THE BUTT-ENDS BY REDUCING CURVATURE AND GEOMETRICAL DEFECTS (IN PARTICULAR THROUGH THE USE OF REVERSE MILL-ROLL BENDING DEVICES);
- DEVELOPMENT OF A METHOD FOR DETERMINING THE SET-POINT FOR THE LOOP LIFTERS MAKING IT POSSIBLE TO ELIMINATE THICKNESS AND WIDTH VARIATIONS AT THE BUTT-ENDS.
THE ABOVE-MENTIONED ASPECTS ARE TO BE STUDIED SIMULTANEOUSLY ON THE CONTINUOUS SHEET MILL OPERATED BY FORGES DE CLABECQ, S.A. AND THE WIDE STRIP MILL OPERATED BY COCKERILL SAMBRE, S.A. AT CHERTAL.

Programm/Programme

• ECSC-STEELRES 6C - Medium-term orientation (ECSC) "steel research in relation to the General Objectives for Steel", 1981-1985

Thema/Themen

Data not available

Aufforderung zur Vorschlagseinreichung

Data not available

Finanzierungsplan

Data not available

Koordinator

CENTRE DE RECHERCHES METALLURGIQUES

• EU-Beitrag: Keine Daten
• Adresse: RUE ERNEST SOLVAY 11 ; 4000 LIEGE ; Belgien
• Gesamtkosten: Keine Daten