FeCoProGenProject reference: 620142
Funded under :
FeCo based magnetic alloys with high strength and minimized iron losses, for new high speed aerospace generator
Total cost:EUR 330 298,72
EU contribution:EUR 213 239
Call for proposal:SP1-JTI-CS-2013-01See other projects for this call
Funding scheme:JTI-CS - Joint Technology Initiatives - Clean Sky
The development of a new Iron-cobalt soft magnetic alloy is proposed with a smart combination of both high mechanical strength and moderated iron losses. The former allows higher speed of electric generator, increasing the mass power density. The later improves the thermal transfer of dissipated energies, the sustainability of the generator and help then to a further power density increase. In the complete continuation of Aperam RTD efforts these last years, this new material very recently patented has been demonstrated
on laboratory scale and - in some few cases of working features – on
industrial tools for small quantities.
But this new material is roughly defined as a new alloys family – Iron-cobalt fully processed (i.e. annealed) and workable material – and it needs to be optimised and fully characterized with respect to working solicitations. In the framework of this project, such a high strength new FeCo alloy will be defined in terms of processing parameters corresponding to 800MPa yield stress (R0,2) whereas several metallurgical ways will be studied to get lower iron losses than previous know ones (280W/kg at 2T/400Hz for 0,4mm thickness) without a marked decrease of R0,2. Complementary processes
such as thin foils assembly, recovery or texturization will be used to reach this later target, with the help of a specialized partner (LPCES).
After optimization of the lamination structure and of its microstructure, the new material will be deeply characterized mechanically and magnetomechanically (including influence of uni- or bi-axial stresses on the magnetic properties) by an other specialized partner (LMT). At the same moment some small quantities (300 to 500kg) of the optimised alloy will be processed on industrial tools and punched in pieces to provide 2 rotor stacks to theTopic Manager Company.
EU contribution: EUR 68 970
AVENUE JEAN JAURES
Tel.: +33 386213324
Fax: +33 386213111
EU contribution: EUR 98 084
Rue Georges Clémenceau
Tel.: +33 169155589
Fax: +33 169155599
EU contribution: EUR 46 185
Avenue du President Wilson 61
Tel.: +33 1 47 40 68 73