Cel The development of a new Iron-cobalt soft magnetic alloy is proposed with a smart combination of both high mechanical strength and moderated iron losses. The former allows higher speed of electric generator, increasing the mass power density. The later improves the thermal transfer of dissipated energies, the sustainability of the generator and help then to a further power density increase. In the complete continuation of Aperam RTD efforts these last years, this new material very recently patented has been demonstratedon laboratory scale and - in some few cases of working features – onindustrial tools for small quantities.But this new material is roughly defined as a new alloys family – Iron-cobalt fully processed (i.e. annealed) and workable material – and it needs to be optimised and fully characterized with respect to working solicitations. In the framework of this project, such a high strength new FeCo alloy will be defined in terms of processing parameters corresponding to 800MPa yield stress (R0,2) whereas several metallurgical ways will be studied to get lower iron losses than previous know ones (280W/kg at 2T/400Hz for 0,4mm thickness) without a marked decrease of R0,2. Complementary processessuch as thin foils assembly, recovery or texturization will be used to reach this later target, with the help of a specialized partner (LPCES).After optimization of the lamination structure and of its microstructure, the new material will be deeply characterized mechanically and magnetomechanically (including influence of uni- or bi-axial stresses on the magnetic properties) by an other specialized partner (LMT). At the same moment some small quantities (300 to 500kg) of the optimised alloy will be processed on industrial tools and punched in pieces to provide 2 rotor stacks to theTopic Manager Company. Program(-y) FP7-JTI - Specific Programme "Cooperation": Joint Technology Initiatives Temat(-y) JTI-CS-2013-1-SGO-02-070 - New magnetic materials for machines Zaproszenie do składania wniosków SP1-JTI-CS-2013-01 Zobacz inne projekty w ramach tego zaproszenia System finansowania JTI-CS - Joint Technology Initiatives - Clean Sky Koordynator APERAM ALLOYS IMPHY SAS Wkład UE € 68 970,00 Adres AVENUE JEAN JAURES 58160 IMPHY Francja Zobacz na mapie Rodzaj działalności Private for-profit entities (excluding Higher or Secondary Education Establishments) Kontakt administracyjny Laurence Defosse (Mrs.) Linki Kontakt z organizacją Opens in new window Strona internetowa Opens in new window Koszt całkowity Brak danych Uczestnicy (2) Sortuj alfabetycznie Sortuj według wkładu UE Rozwiń wszystko Zwiń wszystko UNIVERSITE PARIS-SUD Francja Wkład UE € 98 084,00 Adres RUE GEORGES CLEMENCEAU 15 91405 ORSAY CEDEX Zobacz na mapie Rodzaj działalności Higher or Secondary Education Establishments Kontakt administracyjny Nicolas Lecompte (Mr.) Linki Kontakt z organizacją Opens in new window Strona internetowa Opens in new window Koszt całkowity Brak danych ECOLE NORMALE SUPERIEURE PARIS-SACLAY Francja Wkład UE € 46 185,00 Adres 4 AVENUE DES SCIENCES 91190 Gif-Sur-Yvette Zobacz na mapie Region Ile-de-France Ile-de-France Essonne Rodzaj działalności Higher or Secondary Education Establishments Kontakt administracyjny Agnes Tang Tong Hi (Mrs.) Linki Kontakt z organizacją Opens in new window Strona internetowa Opens in new window Koszt całkowity Brak danych
