Skip to main content
Go to the home page of the European Commission (opens in new window)
English English
CORDIS - EU research results
CORDIS
Content archived on 2024-06-18

ENhanced DURability materials for Advanced stacks of New solid oxide fuel CElls

Objective

"The project aims at developing reliable predictive models to estimate long-term (i.e. > 20 kh) performance and probability of failure of SOFC stacks based on existing materials and design produced by the industrial partners. This will allow the realization of stacks with extended service intervals and reduced maintenance cost with respect to the present stack technology. The extension of service life will be supported by the introduction of Early Warning Output Signals triggered counterstrategies. The project is structured into three phases: consolidation of knowledge and refinement of models on a previously operated State of Art stack (1st Loop); enhancement of materials, design and predictive models via iterative loops (Improvement Iterative Loop); statistical validation of achieved improvements via standard and accelerated tests (Validation Process). The stack is a system of interfaces/interphases giving rise to complex phenomena that which have to be separated in single phenomena processes. The ""single phenomena"" are generated by the minimum of interfaces/interphases in a quasi-independent way and therefore suitable for a separate deep investigation via micro-samples studies. The improvements will be especially validated by: the application of accelerated test protocols; the evaluation of robustness of stacks and components toward load cycles and thermal cycles. The comparison with an operating not cycled stack will give the value of performance (voltage) loss for the rated stack life cycle that has to be <5% for 100 load cycles (idle to rated load) or 50 thermal cycles (room temperature to operating temperature). The outcomes will be statistically demonstrated by operating 6 stacks in standard conditions and a minimum of 3 micro-sample per interphase in standard, cycled and accelerated conditions with constant monitoring via modelling."

Fields of science (EuroSciVoc)

CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.

You need to log in or register to use this function

Programme(s)

Multi-annual funding programmes that define the EU’s priorities for research and innovation.

Topic(s)

Calls for proposals are divided into topics. A topic defines a specific subject or area for which applicants can submit proposals. The description of a topic comprises its specific scope and the expected impact of the funded project.

Call for proposal

Procedure for inviting applicants to submit project proposals, with the aim of receiving EU funding.

FCH-JU-2013-1
See other projects for this call

Funding Scheme

Funding scheme (or “Type of Action”) inside a programme with common features. It specifies: the scope of what is funded; the reimbursement rate; specific evaluation criteria to qualify for funding; and the use of simplified forms of costs like lump sums.

JTI-CP-FCH - Joint Technology Initiatives - Collaborative Project (FCH)

Coordinator

UNIVERSITA DEGLI STUDI DI GENOVA
EU contribution
€ 440 204,00
Address
VIA BALBI 5
16126 GENOVA
Italy

See on map

Region
Nord-Ovest Liguria Genova
Activity type
Higher or Secondary Education Establishments
Links
Total cost

The total costs incurred by this organisation to participate in the project, including direct and indirect costs. This amount is a subset of the overall project budget.

No data

Participants (11)

My booklet 0 0