Skip to main content
European Commission logo print header

Manufacturing and optimization of a PEEK scroll by fusible core injection moulding

Objetivo

Egmond Plastic is the global specialist in the area of fusible core injection moulding in combination with Peek material with carbon reinforced fibres. This technology makes it possible to mould inject complicated hollow parts all at one time, without the need for welding. With more than 20 years experience in fusible core injection moulding for the aerospace industry, this type of production technology has been used for the fuel system components for military and civil aircrafts. The advantage are very obvious, 50% weight reduction as well as a possible 30% cost reduction.

The manufacturing of a scroll for the air cycle machine would be a next step for fusible core injection moulding technology. Until today, no company offers the scroll in thermoplastic material. This program will identify, design, and manufacture a scroll made from thermoplastic material (Peek with reinforced carbon fibres), using a fusible core. This program will demonstrate the use of thermoplastic material for this application and will proof that considerable gains are to be expected when making the scroll from thermoplastic material.

The expected impact of the program are large. For Clean Sky, considerable weight savings are to be expected, resulting in lower emissions and improved performance. From a technical point of view, it is the next step in technology change for the air cycle machine and it might lead to possible other components to be replaced with a thermoplastic material. From Egmond Plastic, this program provides an opportunity to become the world class leader of fusible core technology for the aerospace industry.

Convocatoria de propuestas

SP1-JTI-CS-2013-02
Consulte otros proyectos de esta convocatoria

Coordinador

EGMOND PLASTIC BV
Aportación de la UE
€ 244 350,00
Dirección
BERENKOOG 31
1822 BH ALKMAAR
Países Bajos

Ver en el mapa

Tipo de actividad
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Contacto administrativo
Richard Brandwijk (Mr.)
Enlaces
Coste total
Sin datos