HIPSGEARProject reference: 632472
Funded under :
Scouting High Performance Steels for Gears and Bearings
Total cost:EUR 699 808
EU contribution:EUR 398 855
Call for proposal:SP1-JTI-CS-2013-02See other projects for this call
Funding scheme:JTI-CS - Joint Technology Initiatives - Clean Sky
The HIPSGEAR (scouting HIgh Performance Steels for GEARs and bearings) project supports the aims to demonstrate technologies for an Integral Drive System (IDS) engine concept. The gearbox system requirements, transferring power from the fan to the low pressure turbine, lead to the need of new innovative high strength materials for critical components in particular bearings and their integration with the surrounding components (e.g. gears).
The tasks and technical objectives are in particular:
• definition of new technologies to meet bearings and gears life and reliability requirements under the expected operation conditions and technology development steps;
• demonstration of the improvement of the new technologies through experimental tests for the bearings and gears life and wear resistance evaluation;
• demonstration through experimental tests for the applicability of the new technologies to gear materials to optimum bearing integration.
The activity will be managed with a Phase & Gate approach and will include detailed technical / program documentation, including planning, drawings, design report, risk analysis, test plan and test requirements, test results and test analysis reports.
EU contribution: EUR 252 000
GEORG SCHAFER STRASSE 30
Tel.: +49 9721 91 3131
EU contribution: EUR 146 855
VIA DI TORRETTA SAN PIERO A GRADO
Tel.: +39 0502210063
Fax: +39 05038351215