PLENOPTIMUMProject reference: 632524
Funded under :
MANUFACTURING OPTIMIZATION OF A PLENUM WITH GFRP CYANATE ESTER-BASED PREPREG
Total cost:EUR 299 416
EU contribution:EUR 224 562
Topic(s):JTI-CS-2013-2-ECO-01-072 - Manufacturing optimization of a plenum with GFRP cyanate ester-based prepeg
Call for proposal:SP1-JTI-CS-2013-02See other projects for this call
Funding scheme:JTI-CS - Joint Technology Initiatives - Clean Sky
"Cyanate ester resins offer significant advantages as composite matrices because of their high thermal stability, their improved toughness, low outgassing, low moisture uptake and radiation resistance due to their low dielectric constant. Towards the direction of incorporating these materials in the aerospace industry, a new glass/cyanate ester material system was characterized for use in the plenum of the air cooling unit of aircrafts. However, the first trials with this new prepreg to manufacture real parts (plenum housing) in an autoclave, highlighted some heterogeneity issues in the reliability and reproducibility of the manufacturing process.
PLENOPTIMUM project aims to address the reasons that lead to the aforementioned heterogeneities and through a novel Design of Experiments approach identify a number of possible influential factors that affect the manufacturing process (in autoclave and out-of-autoclave) and potentially cause deviations and heterogeneities. For the first time, factors additional to temperature profile and pressure shall be examined according to their effect on the final quality of the composite materials and the actual plenum. Process modeling as well as online curing monitoring technologies will assist the optimization task and the quest of the optimum curing cycle.
Manufacturing trials for plenum manufacturing in an autoclave as well as out-of-autoclave process will take place in the final part of the project taking into account the results of a test campaign specially designed to highlight the effect each one of the identified influential factors has. Guidelines and recommendations to the topic manager and manufacturer that ensure and optimize the manufacturing process are the final outcome.
Both participants that form PLENOPTIMUM consortium have a strong background and experience on processing/manufacturing optimization and have the proper infrastructure to meet the targets set."
EU contribution: EUR 116 550
UNIVERSITY CAMPUS RIO PATRAS
265 04 RIO PATRAS
Tel.: +30 2610969441
EU contribution: EUR 108 012
PARQUE CIENTIFICO Y TECNOLOGICO DE BIZKAIA C GELDO EDIFICIO 700
48160 DERIO BIZKAIA
Tel.: +34 946430850