AeropaftProject ID: 652101
H2020-EU.3.3. - SOCIETAL CHALLENGES - Secure, clean and efficient energy
Delay of flow separation and stall on Aerofoils using a Passive Flow control Technology which will improve aerodynamic performance and stability of wind turbines increasing their range of operation
Całkowity koszt:EUR 71 429
Wkład UE:EUR 50 000
Kraj koordynujący:United Kingdom
Topic(s):SIE-01-2014-1 - Stimulating the innovation potential of SMEs for a low carbon energy system
Zaproszenie do składania wniosków:H2020-SMEINST-1-2014See other projects for this call
System finansowania:SME-1 - SME instrument phase 1
Flow separation and dynamic stalling in aerofoils result in increased drag, reduced lift and increased dynamic loads on aerodynamic devices/vehicles. This culminates in reduced aerodynamic efficiency and increased structural vibrations, which are noisy and reduce the operating life of aerodynamic devices. To delay flow separations and dynamic stalling, flow control is engaged either actively (artificial means) or passively (natural means). This project describes a novel passive flow control method (Aeropaft) to be applied primarily in the wind turbine (WT) industry, then to aircraft and ground and marine vehicles.
Wind energy is the fastest growing Renewable Energy source (RES) at 24.4% per year. To keep pace with growing demand, there is need for advanced technologies to increase the aerodynamic efficiency. Aeropaft is a simple technology exploiting high velocity currents from near the leading edge (via internal ducts) to re-energise the free-stream flow at the top of an aerofoil. This results in a 5% increase in electrical power yield for a 1MW WT, increase in lift (~16%), reduction of profile drag force (~7%) at higher aerofoil angles of incidences (>12o), and the reduction of wear caused by vibrations. We will penetrate 1% of the global WT market and 10% of the European market. Licensed Manufacturers stand to gain a 0.33% increase in market value and revenue of €1.72bn, while utility companies gain €101,013 per annum through savings and increased energy output per WT. Our revenue will come through licensing at 0.2% of the whole turbine cost translating to revenue of €10.3m and profits of €7.72m, five years post commercialization.
Phase 1 will entail a market study, partner search, assessing structural integrity issues and developing an IP and commercialisation strategy.
Phase 2 will be to modify blades of existing WTs with our technology and test demonstrate in the operational environment.
Wkład UE: EUR 50 000
INNOVATION CENTRE GALLOWS HILL
CV34 6UW WARWICK