AGRALProject ID: 654216
Finanziato nell'ambito di:
Development of the optimum AGRAL cermet manufacturing process for aluminium inert anode application and fuel cell interconnect plates.
Dettagli del progetto
The AGRAL (Advanced Green Aluminium anode) project will aim at developing the manufacturing technologies of a specific cermet (called AGRAL cermet within this proposal) that has shown at lab scale outstanding properties in high temperature and corrosive media i.e. aluminium electrolysis. Furthermore, this AGRAL cermet enables Aluminium Pechiney, leader of this project, to consider the replacement of their current carbon anode by this inert anode thus decreasing to zero the CO2 emission during electrolysis process. Furthermore this AGRAL cermet will be tested for two applications: aluminium electrolysis (for the manufacturing of an inert anode up to industrial scale) and for protection of interconnect plates in hydrogen and fuel cell application (up to pre-prototype scale). This AGRAL cermet will be used as an inert anode in the Aluminium industry. Thanks to the inert anode, it is expected to decrease by a minimum of 50% of CO2 emissions compared to currently used carbon anode. Then, the transfer to the fuel and hydrogen cell applications will be studied.
To reach the objectives, the partners will aim at:
- Developing the manufacturing process for the AGRAL cermet coating for aluminium electrolysis
o The Thermal Spray coatings: HVOF (combined eventually with Cold Spray) and eGun (HVOF with ethanol, technology developed by Flame Spray Technologies)
o The Powder Metallurgy Process : HIP and Ultraflex (technology developed by Kennametal Stellite)
The final manufacturing process will be adapted to large dimension (an anode is 1m long) and to complex shape (plates, grid).
- Developing qualification test for real scale inert anode to detect failure of the anode operation
- Developing the manufacturing process for the AGRAL cermet coating for hydrogen and fuel cell interconnect plates
The economic viability and the environmental impact of both the inert anode and its manufacturing process and the fuel cell application along their whole life cycle, will be monitored.
Contributo UE: EUR 2 329 917,32
725 RUE ARISTIDE BERGES
Contributo UE: EUR 448 470
Contributo UE: EUR 412 023,75
6921 RL DUIVEN
Contributo UE: EUR 833 528
RUE LEBLANC 25
75015 PARIS 15
Contributo UE: EUR 136 750
Via Guido Rossa, 26
35020 Ponte San Nicolo
Contributo UE: EUR 339 500
RUE JEAN PAROT 58
42023 SAINT ETIENNE CEDEX 2
Contributo UE: EUR 198 282,50
Contributo UE: EUR 402 238,38
Contributo UE: EUR 131 436,18