Objetivo The eTAG (embedded ThermoAcoustic Generator) includes a novel electricity- generating thermoacoustic engine, embedded inside an existing residential boiler, to form a renewable and economic micro Combined Heat and Power (mCHP) system, without any hot moving parts. The proposed synergetic approach results with a sustainable system, taking full advantage of alternative fuels value to produce regulated electrical power as well as domestic heating, at overall energy efficiency above 90%.To enable a cost effective application, the embedded electricity generating unit must be highly reliable and maintenance free, thus a thermoacoustically based solution is expected to be the ideal solution.Qnergy has recently demonstrated 1 kW solar thermoacoustic application. However, the optimal configuration and combined system spec must be refined for best market acceptance, according to consumer’s needs and budget limitations. In common situations, a typical user will experience an ROI of less than two years; though specific government policies may lead to different optimal power capacities, as net metering allows using an oversized alternator and feedback the grid in excessive electricity. Thus our planned feasibility assessment will include a thorough business plan, focusing on market needs, time to market, and identifying the main customers and competitors; resulting in a measurable product specification and detailed risk management plan. Additionally, the key factors affecting overall system performance will be identified according to the thermo-acoustic-electrical simulation and the detailed design model. Moreover, a full freedom to operate IP survey will be performed, while the product cost, manufacturing technologies and its limitations will be covered.During phase 1 broad market understanding would be sought, allowing to better select the content and schedule of the following phase 2, focusing mostly on particular techniques for lowering the $/W value of the full system. Ámbito científico engineering and technologyenvironmental engineeringenergy and fuelsrenewable energyengineering and technologyelectrical engineering, electronic engineering, information engineeringelectrical engineeringpower engineeringelectric power generationsocial scienceseconomics and businessbusiness and managementbusiness modelssocial sciencessociologygovernancecrisis management Programa(s) H2020-EU.3.3. - SOCIETAL CHALLENGES - Secure, clean and efficient energy Main Programme H2020-EU.2.3.1. - Mainstreaming SME support, especially through a dedicated instrument Tema(s) SIE-01-2014-1 - Stimulating the innovation potential of SMEs for a low carbon energy system Convocatoria de propuestas H2020-SMEInst-2014-2015 Consulte otros proyectos de esta convocatoria Convocatoria de subcontratación H2020-SMEINST-1-2014 Régimen de financiación SME-1 - SME instrument phase 1 Coordinador QNERGY ACS LTD Aportación neta de la UEn € 50 000,00 Dirección D GILBOA 18960 EIN HAROD ICHUD Israel Ver en el mapa Pyme Organización definida por ella misma como pequeña y mediana empresa (pyme) en el momento de la firma del acuerdo de subvención. Sí Tipo de actividad Private for-profit entities (excluding Higher or Secondary Education Establishments) Enlaces Contactar con la organización Opens in new window Participación en los programas de I+D de la UE Opens in new window Red de colaboración de HORIZON Opens in new window Coste total € 71 429,00
