Obiettivo The project is about designing, manufacturing and marketing a range of stand-alone power supply products based on pico-turbines able to efficiently produce on-line and deliver the few tens to hundreds of watts needed by the process and quality control equipment of the water supply networks.Indeed, so as to limit the Non-Revenue Water (35% NRW in average worldwide ) and to reach the expected service quality, sensors as well as regulation systems and signal transmitters are increasingly installed at the innumerable junctions of the water distribution networks.Beyond those needs, there are several similar industrial stand-alone power needs which can be fulfilled by our breakthrough technology, like for industrial fishing monitoring equipment, irrigation monitoring systems, sailboat on-board safety and comfort equipment or weather marine station and buoy networks equipment, all being of global reach.Thanks to its partnerships with public research labs (Polytechnique Grenoble, CNRS) and experts (Prof. M. Jufer, EPF Lausanne), as well as 3 years of technical development, Save Innovations designed its first innovating pico-turbine, which is intrinsically waterproof, simple (5 main components), requires no specific maintenance and produce at flow speed as low as 0.5m/s. 4 Patents are published, and 5 new patents have been applied.A first set of prototypes have been successfully tested in a relevant environment. Feasibility within the breadth of the water network requirements as well as product range analysis is now needed before heading to the standard product development and industrialization (will trigger a phase-2 request) Campo scientifico agricultural sciencesagriculture, forestry, and fisheriesfisheriesengineering and technologycivil engineeringwater engineeringirrigationengineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensorsengineering and technologycivil engineeringwater engineeringwater supply systemsengineering and technologycivil engineeringstructural engineeringhydraulic engineering Programma(i) H2020-EU.3.3. - SOCIETAL CHALLENGES - Secure, clean and efficient energy Main Programme H2020-EU.2.3.1. - Mainstreaming SME support, especially through a dedicated instrument Argomento(i) SIE-01-2014-1 - Stimulating the innovation potential of SMEs for a low carbon energy system Invito a presentare proposte H2020-SMEInst-2014-2015 Vedi altri progetti per questo bando Bando secondario H2020-SMEINST-1-2014 Meccanismo di finanziamento SME-1 - SME instrument phase 1 Coordinatore SAVE INNOVATIONS Contribution nette de l'UE € 50 000,00 Indirizzo 3 rue des arts et metiers 38000 Grenoble Francia Mostra sulla mappa PMI L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione. Sì Regione Auvergne-Rhône-Alpes Rhône-Alpes Isère Tipo di attività Private for-profit entities (excluding Higher or Secondary Education Establishments) Collegamenti Contatta l’organizzazione Opens in new window Partecipazione a programmi di R&I dell'UE Opens in new window Rete di collaborazione HORIZON Opens in new window Costo totale € 71 429,00