Skip to main content
European Commission logo print header

New BAMboo ENGineered bio-material for sustainable building components

Obiettivo

Our proposed technology uses bamboo for manufacturing a unique new bio-material which has the potential to replace most commonly used structural materials such as concrete, steel and timber. This novel process will not only ensure the sustainable supply of raw materials via environment friendly new solution in construction industry, but will also provide participating SME with the opportunity to derive an ongoing income.
BAMBENG proposal outlines the opportunity to develop an innovative technological process which will produce a new constructional product, chemical free and environmental friendly (avoiding the use of toxic and polluting glues) with supreme technological, economic and environmental footprint performances. That would make BAMBENG advantageous competitor and feasible alternative as BAMBENG structural material, represents the best performing material for supporting structure for seismic building.
BAMBENG is obtained by a simple chafing and pressure welding process, producing a semi-finished completely biological new component. The process in chemical free, energy saving and with a very low footprint,
Compared with the most direct and similar competitive materials (wood, glulam and glubam) BAMBENG offers better technical performances and up to 45% of cost savings (based on Cost Structure Analysis).
BAMBENG is worth to invest in because it is a combination of proven technology and novel application of demonstrable technology and methods which have both economic & environmental benefits:
- Development of bigger structural components for buildings sector for easy substitution of current material like steel, aluminium, concrete, and even timber,
- Development of building design to exceed seismic and hurricane requirements,
- Transfer to other sectors such as interior and exterior architectural, packaging and design artefacts,
- Improvement of local bamboo crops at EC level, and
- Potential to license the technology to SMEs throughout the EU.

Invito a presentare proposte

H2020-SMEInst-2014-2015

Vedi altri progetti per questo bando

Bando secondario

H2020-SMEINST-1-2014

Meccanismo di finanziamento

SME-1 - SME instrument phase 1

Coordinatore

CARTACCI BRUNO & C SNC DI ALESSANDRO E LEONARDO CARTACCI
Contribution nette de l'UE
€ 50 000,00
Indirizzo
Viale comaschi 144
56021 Cascina
Italia

Mostra sulla mappa

PMI

L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.

Regione
Centro (IT) Toscana Pisa
Tipo di attività
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Collegamenti
Costo totale
€ 71 429,00