Skip to main content
European Commission logo
English English
CORDIS - EU research results
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary

Development of a Machine for Multi-Material Manufacturing

Objective

The main goal of this project is the development of an industrial “plug & play” system for additive layer manufacturing which is based on a blown powder process using Plasma Transferred Arc (PTA) Technology. The developed 4M System will offer:
a) Simple equipment concept based on well established PTA technology for hard facing coatings
b) Possibility to realize Multi-Material concepts
c) Suitability of the technology to be used for a wide range of raw materials
d) High deposition/building rates
e) Possibility to realize large size components (up to 1,5 m x 1,5 m in the first version)
Within the project the system will be developed to be used for wo different materials (Al and Ti-alloys) and to demonstrate one multi-material concept. The developed process will be used to realize three different demonstrators (case studies) and to perform testing of the manufactured prototypes under space relevant testing conditions.

Call for proposal

H2020-SMEInst-2014-2015

See other projects for this call

Sub call

H2020-SMEINST-2-2014

Coordinator

RHP TECHNOLOGY GMBH
Net EU contribution
€ 455 000,00
Address
FORSCHUNGSZENTRUM SEIBERSDORF GEBAUDE CA
2444 Seibersdorf An Der Leitha
Austria

See on map

SME

The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed.

Yes
Region
Ostösterreich Niederösterreich Wiener Umland/Südteil
Activity type
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Links
Total cost
€ 650 000,00

Participants (1)