Micro-IMUProject reference: 641539
Funded under :
MEMS-Accelerometer Miniaturisation of the analogue electronics in an Application Specific Circuit (ASIC)
Total cost:EUR 792 800
EU contribution:EUR 594 600
Topic(s):JTI-CS-2013-3-SFWA-01-054 - MEMS Accelerometer Miniaturisation of the analog electronics in ASIC(s)
Call for proposal:SP1-JTI-CS-2013-03See other projects for this call
Funding scheme:JTI-CS - Joint Technology Initiatives - Clean Sky
Very small inertial measurement units (IMU) are necessary for measuring the aircraft wing deformation during flight. This objective can be only met, if the sensor system is highly integrated. GEMAC will develop in the project an ASIC in which all necessary analog blocks are implemented (high performance switches, charge amplifier, temperature probe, gain and offset, ADC, eventually voltage reference). The first development step is the analysis of the specification and the existing mock-up to investigate and to confirm the feasibility of ASIC integration, to evaluate risks and to setup the detailed planning. In this phase, GEMAC needs continuous support from the consortium partner Sagem. After a Go-Ahead decision the final system architecture will be defined, followed by the design and simulation of the single blocks and the whole system including the interfaces to the MEMS element and the surrounding system electronics. Mentor tools will be used for all simulations in the design flow. In order to minimise risks and to save time the first run will cover only the main components of the system. The designed and checked layout will be transferred for preparation to XFAB. The company is one of the leading semiconductor and ASIC manufacturers in Europe and offers all state-of-the-art technologies for analogue, digital, mixed signal designs. GEMAC has business contacts to this fab for many years, all necessary libraries are available.
After delivery the ASIC samples will be tested together with Sagem. In the result, a list of necessary redesign activities will be setup. In parallel the design will be completed with the still missing functional blocks. After successful simulation of back-annotated netlists the second run will start. The samples supplied by XFAB will be tested again together with Sagem.
GEMAC is a R&D oriented SME with experiences in ASIC design and microsystem technology as well as MEMS based acceleration sensors for many years. With its participation in Clean Sky the company intends to contribute to the goal of Clean Sky to speed up new and greener aviation designs to protect our environment.
EU contribution: EUR 594 600
ZWICKAUER STRASSE 227
Fax: +49 371 3377 272