ARCTICProject reference: 686366
Funded under :
Advanced Bearing Technologies to Increase Capabilities
Total cost:EUR 2 388 531,25
EU contribution:EUR 2 388 530,5
Call for proposal:H2020-CS2-CFP01-2014-01See other projects for this call
Funding scheme:CS2-RIA - Research and Innovation action
The development of Very High Bypass Ratio (VHBR) engines is a promising engine concept to fulfil the major milestones of the Sustainable and Green Engines (SAGE) programme. The significant environmental benefits of this new engine are synonymous with an increased speed and loading capabilities.
In terms of engine performance and reliability, the design, sizing and capacities of the rolling element bearings, which are crucial components, can affect the whole engine architecture.
The aim of the ARCTIC project is thus: “to develop and demonstrate various rolling bearing technologies that overcome the current design rules of aero-engine bearings and allow developing a VHBR engine”.
The main activity is the development of a new corrosion resistant carburized steel grade with the associated surface technologies. Coupled with ceramic rolling elements, this novel material solution will demonstrate a 15% improvement in rolling contact stress capability and 25% increase in rotation speed if compared to the current baseline solutions and without any detrimental effect on reliability.
In parallel, powder metallurgical steel grades will be also developed to assess the potential of this breakthrough technology that will act as building blocks for a 30% increase in contact stress capabilities.
To demonstrate their enhanced performances, the proposed new bearing technologies will be tested in nominal and in degraded running conditions (from the elementary scale to the full- scale).
In addition, across-the-board action will aim to develop a new contact model to fully justify the experimental outputs: the gained theoretical knowledge will enable the transfer and exploitation of projects results to the industrial field by providing analysis tools and new design rules.
The ARCTIC consortium offers high-level engineering capabilities, performance test facilities and manufacturing units necessary to develop a European advanced bearing technology for future VHBR engines.
EU contribution: EUR 1 725 163
Avenue Marc Seguin 1
26240 SAINT VALLIER
EU contribution: EUR 663 367,5
3439 MT NIEUWEGEIN