Objetivo A faced challenge for the CROR concept is to maintain the current level of safety mandated by aviation and certification regulations and to provide blade impact mitigation at the airframe level without resulting in a large weight penalty. This leads to a demanding impact analysis and design problem of two complex composite structures, the fuselage structure (target) and the CROR blade or fragment structure (impactor). The main aim of the proposed research is to develop a robust, computationally efficient, multi-scale numerical simulation model, based on ABAQUS Explicit FE solver, for the virtual-testing of partial or full-scale CROR blade impacts. Following common practice, a building block approach is employed to validate the predictive FEA capabilities. Specific objectives of the project are: (1) Design of Representative Blade Specimens; (2) Development of multi-scale explicit impact Finite Element Models; (3) Manufacturing of Representative Specimens.The project will primarily focus on the development and validation of robust and mature ABAQUS Explicit FEA models coupled with GENOA multi-scale composite mechanics and progressive damage analysis software, for the numerical simulation of impact of CROR blades. Virtual testing will be supported by a physical testing building block plan. A series of representative coupons and physical bade specimens will be manufactured using the RTM method. Low level tests entailing material characterization and representative impacts of composite plates will be conducted to provide all necessary material properties and the verification of the constitutive material models starting from micromechanics scale. The fabrication of all blade specimens will enable the comprehensive validation and improvement of numerical FEA models to ensure realistic predictive capabilities with respect to impact behavior of the blade impactor structure. Ámbito científico engineering and technologymaterials engineeringfibersengineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensorsoptical sensorsengineering and technologymaterials engineeringcompositesengineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraftengineering and technologyenvironmental engineeringenergy and fuels Programa(s) H2020-EU.3.4. - SOCIETAL CHALLENGES - Smart, Green And Integrated Transport Main Programme H2020-EU.3.4.5.4. - ITD Airframe Tema(s) JTI-CS2-2014-CFP01-AIR-01-05 - Blade FEM impact simulations and sample manufacturing for CROR Aircraft Convocatoria de propuestas H2020-CS2-CFP01-2014-01 Consulte otros proyectos de esta convocatoria Régimen de financiación CS2-RIA - Research and Innovation action Coordinador ALPHA CONSULTING SERVICE SRL Aportación neta de la UEn € 135 446,25 Dirección VIA MONTELEONE SABINO 12/B 00131 ROMA Italia Ver en el mapa Pyme Organización definida por ella misma como pequeña y mediana empresa (pyme) en el momento de la firma del acuerdo de subvención. Sí Región Centro (IT) Lazio Roma Tipo de actividad Private for-profit entities (excluding Higher or Secondary Education Establishments) Enlaces Contactar con la organización Opens in new window Sitio web Opens in new window Participación en los programas de I+D de la UE Opens in new window Red de colaboración de HORIZON Opens in new window Coste total € 135 446,25 Participantes (2) Ordenar alfabéticamente Ordenar por aportación neta de la UE Ampliar todo Contraer todo PANEPISTIMIO PATRON Grecia Aportación neta de la UEn € 98 287,50 Dirección UNIVERSITY CAMPUS RIO PATRAS 265 04 Rio Patras Ver en el mapa Región Κεντρική Ελλάδα Δυτική Ελλάδα Αχαΐα Tipo de actividad Higher or Secondary Education Establishments Enlaces Contactar con la organización Opens in new window Sitio web Opens in new window Participación en los programas de I+D de la UE Opens in new window Red de colaboración de HORIZON Opens in new window Coste total € 98 287,50 INASCO HELLAS ETAIREIA EFARMOSMENON AERODIASTIMIKON EPISTIMON EE Grecia Aportación neta de la UEn € 110 493,75 Dirección NAPOLEONTOS ZERVA 18 16675 Glyfada Athina Ver en el mapa Pyme Organización definida por ella misma como pequeña y mediana empresa (pyme) en el momento de la firma del acuerdo de subvención. Sí Región Αττική Aττική Νότιος Τομέας Αθηνών Tipo de actividad Private for-profit entities (excluding Higher or Secondary Education Establishments) Enlaces Contactar con la organización Opens in new window Sitio web Opens in new window Participación en los programas de I+D de la UE Opens in new window Red de colaboración de HORIZON Opens in new window Coste total € 110 493,75