Obiettivo The goal of FILE.BIO project is to reduce the negative effects on the environment that derive from industrial finishing operations on leather, which constitute one of the most polluting industrial processes in the leather production cycle. Thisresult will be obtained by developing a totally new family of supplementary products that are specifically designed for finishing. The products will contain naturally-derived polymers (biopolymers) instead of synthetic compounds (derived frompetroleum), which are known for their great environmental impact. In particular, we will develop new biopolymer resins that replace the synthetic compounds currently used by tanners.In order to obtain better performance than what is currently possible with synthetic polyurethane compounds treated with other materials, we will use specific nano-materials for improving the mechanical and hydrophobic properties that the new finishing products impart to treated leather.Another important effect of our project will be a major improvement in work conditions at the factories where leather is finished.The goal of our project is to replace 30% of the presently petroleum based substances (approx. 10,000 tons) with chemicals of natural origin that have a low environmental impact and can improve the properties of the leather. 1.5 tons of petroleum are required for producing one ton of synthetic resins: our project will thus have the effect of reducing the consumption of petroleum in Europe by around 15 thousand tons.Overall, our project will have the potential of the following environmental benefits on the European level:1) up to a 30% decrease (equivalent to 10 thousand-ton) in the amount of synthetic, potentially pollution substances used in the tanning processes;2) up to a 30% reduction (equivalent to 15 thousand-ton) in petroleum consumption, in the tanning process;3) a significant improvement in the work environment of approx. 35,000 persons. Campo scientifico natural scienceschemical sciencespolymer sciencespolyurethaneengineering and technologyenvironmental engineeringenergy and fuelsfossil energypetroleumengineering and technologymaterials engineeringcoating and filmsnatural sciencesearth and related environmental sciencesenvironmental sciencespollutionengineering and technologynanotechnologynano-materials Programma(i) H2020-EU.3.5. - SOCIETAL CHALLENGES - Climate action, Environment, Resource Efficiency and Raw Materials Main Programme H2020-EU.2.3.1. - Mainstreaming SME support, especially through a dedicated instrument Argomento(i) SC5-20-2015-1 - Boosting the potential of small businesses for eco-innovation and a sustainable supply of raw materials Invito a presentare proposte H2020-SMEInst-2014-2015 Vedi altri progetti per questo bando Bando secondario H2020-SMEINST-1-2015 Meccanismo di finanziamento SME-1 - SME instrument phase 1 Coordinatore A.L.P.A. - AZIENDA LAVORAZIONE PRODOTTI AUSILIARI S.P.A. Contribution nette de l'UE € 50 000,00 Indirizzo via SEBASTIANO VENIERO 40 20148 MILANO Italia Mostra sulla mappa PMI L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione. Sì Regione Nord-Ovest Lombardia Milano Tipo di attività Private for-profit entities (excluding Higher or Secondary Education Establishments) Collegamenti Contatta l’organizzazione Opens in new window Partecipazione a programmi di R&I dell'UE Opens in new window Rete di collaborazione HORIZON Opens in new window Costo totale € 71 429,00
