Objectif The specific remit of this project is to launch an innovative, environmentally friendly, low-cost process to deink surface-printed plastic film. This process is focused on removing ink thus allowing recycled printed plastic film to be used for the manufacture of added-value products. Two different deinking processes are currently being developed by our competitors. The first is based on reagents used in biotechnology (e.g. non-ionic, cationic and anionic surfactants). The second is based on solvents (e.g. ethanol). The cost (€950/tonne) is the main barrier of the biotechnology reagent process. The solvent-based process is more competitive at €550/tonne but there are several issues over plastic quality (bad odours and colours; low optical properties: DE>3), sustainability (high carbon footprint, 533 kg CO2eq/tonne) and hazards (it must be ATEX compliant due to the risk of explosion). Our process has a clear advantage in terms of price, quality and sustainability in comparison with traditional deinking processes. The combination of adapted sub-processes (milling, deinking, drying, extrusion and water treatment) allows high-quality deinked plastic to be obtained at a low cost. This plastic is aligned with requirements for high added-value applications such as packaging: absence of bad odours and colour, ink removal of 99.9%, modulus 434 Mpa, elongation at break: 596%, good optical properties: DE<3. Moreover, the whole process is designed from a positive environmental point of view: 35% lower carbon footprint (346 kg CO2eq/tonne); use of only environmentally-friendly and water-based surfactants (solvent-free); obtaining of 100% decontaminated water after the process, which can be reused as closed-loop; and the total elimination of dangerous sludge. Champ scientifique engineering and technologyenvironmental engineeringwaste managementwaste treatment processesrecyclingengineering and technologymaterials engineeringcolorssocial scienceseconomics and businessbusiness and managementbusiness modelsnatural sciencesearth and related environmental sciencesatmospheric sciencesclimatologyclimatic changessocial scienceseconomics and businesseconomicssustainable economy Programme(s) H2020-EU.3.5. - SOCIETAL CHALLENGES - Climate action, Environment, Resource Efficiency and Raw Materials Main Programme H2020-EU.2.3.1. - Mainstreaming SME support, especially through a dedicated instrument Thème(s) SMEInst-11-2016-2017 - Boosting the potential of small businesses in the areas of climate action, environment, resource efficiency and raw materials Appel à propositions H2020-SMEInst-2016-2017 Voir d’autres projets de cet appel Sous appel H2020-SMEINST-1-2016-2017 Régime de financement SME-1 - SME instrument phase 1 Coordinateur CADEL RECYCLING LAB S.L. Contribution nette de l'UE € 50 000,00 Adresse CTRA NATIONAL 340 KM 827 46893 Alfarasi Valencia Espagne Voir sur la carte PME L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention. Oui Région Este Comunitat Valenciana Valencia/València Type d’activité Private for-profit entities (excluding Higher or Secondary Education Establishments) Liens Contacter l’organisation Opens in new window Participation aux programmes de R&I de l'UE Opens in new window Réseau de collaboration HORIZON Opens in new window Coût total € 71 429,00
