European Commission logo
English English
CORDIS - EU research results
CORDIS

Solid Oxide Stack Lean Manufacturing

Objective

The proposed SOSLeM project will contribute to the call objectives by improving production processes as well as developing and applying novel manufacturing technologies for FC stacks. The improvements proposed by the project will sum up to a reduction of manufacturing costs of about 70%, leading to decreased capital cost of about 2.500 €/kW.
Besides these outstanding economical and technical improvements, production material will be spared and environmental benefits will be realized. Specifically, the project will:
- Develop new and optimized processes for cassettes production, by avoidance brushing of cassettes, improved sealing adhesion on cassettes, automation of welding, lean manufacturing processes and anode contact layer laser welding,
- Improve stack preparation, by advanced glass curing and stack conditioning and improved gas stations,
- Enable environmental benefits by Cu-based instead of Co-based powder and evaluation of On-site Nickel removal from waste water
- Reduce production time and costs and improve flexibility, by large furnace arrangement, introduction of a multi-stack production station, examination of substituting Co-based powder by Cu-based power,
Examination of partially substituting Co-based powder by enamel coating and simultaneous sintering.

Call for proposal

H2020-JTI-FCH-2015

See other projects for this call

Sub call

H2020-JTI-FCH-2015-1

Coordinator

SOLYDERA SPA
Net EU contribution
€ 604 375,00
Address
VIALE TRENTO 115/117
38017 Mezzolombardo Tn
Italy

See on map

SME

The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed.

Yes
Region
Nord-Est Provincia Autonoma di Trento Trento
Activity type
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Links
Total cost
€ 694 375,00

Participants (5)