Feasibility Study of energy efficient, sustainable, innovative Ceramic powders Dry-Mix method and enabling additives

Informacje na temat projektu

DRYMIX

Identyfikator umowy o grant: 736499

DOI 10.3030/736499

Projekt został zamknięty

Data podpisania przez KE 15 Lipca 2016

Data rozpoczęcia 1 Września 2016

Data zakończenia 28 Lutego 2017

Finansowanie w ramach

• SOCIETAL CHALLENGES - Secure, clean and efficient energy

Koszt całkowity € 71 429,00

Wkład UE € 50 000,00

Koordynowany przez

DAXEL SRL
Italy

Cel

Established process for the manufacture of ceramic parts involve the key step of mixing in the wet state, and controlled
drying (also called atomization) through Spray Dryer equipment. It can guarantee the absolute control in the size and shape
of the particles, and their residual degree of humidity. The advantages, making this a fundamental step in the ceramic
industry, are related to the flowing capacity of the spray-dried granules, permitting the process at high speed and control
over the final performances of the products. As a drawback, this is recognized as one of the most energy intensive steps in
the ceramic process, due to the massive evaporation of water and the use of compressed air, almost equivalent to the
sintering at high temperature. Early results of independent research conducted from DAXEL, in cooperation with a private
laboratory in Italy, have brought to the awareness that it can be avoided, through the implementation into a dry-mixing
process of fluidizing agents, permitting the granulated powders to reach an equivalent level of fluidity, and therefore enabling
equivalent speed of processing. The advantages DAXEL can provide to its ceramic processor customers are the reduction
of one energy intensive step, the reduction of capital investments at no modification of the final quality. Technological
Feasibility, Market Assessment, Business Models and Plans are the objectives of the DryMix project, oriented to permit the
implementation of the project results into real business cases. A new infancy for the industry of ceramics is expected thanks
to the revolution of the DryMix project, permitting an ambitious sky-rocket for DAXEL production and its central role in the
supply of mixing additives, and the process set up for new ranges of customers, in Europe and Worldwide.

Dziedzina nauki

• engineering and technology › materials engineering › ceramics

Program(-y)

• H2020-EU.3.3. - SOCIETAL CHALLENGES - Secure, clean and efficient energy Main Programme
• H2020-EU.2.1.1. - INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Information and Communication Technologies (ICT)
• H2020-EU.2.3.1. - Mainstreaming SME support, especially through a dedicated instrument

Temat(-y)

• SMEInst-09-2016-2017 - Stimulating the innovation potential of SMEs for a low carbon and efficient energy system

Zaproszenie do składania wniosków

H2020-SMEInst-2016-2017

Zobacz inne projekty w ramach tego zaproszenia

Szczegółowe działanie

H2020-SMEINST-1-2016-2017

System finansowania

SME-1 - SME instrument phase 1

Koordynator

DAXEL SRL

• Wkład UE netto: € 50 000,00
• Adres: PIAZZALE NENNI 8 ; 42048 RUBIERA ; Włochy
• MŚP Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant. Tak:
  Region
  Nord-Est › Emilia-Romagna › Reggio nell’Emilia
• Region: Nord-Est › Emilia-Romagna › Reggio nell’Emilia
• Rodzaj działalności: Private for-profit entities (excluding Higher or Secondary Education Establishments)
• Koszt całkowity: € 71 429,00