Objetivo Centrifugal compressor stages using vaneless diffusers are known to have a wide operating range. However, when operated outside of this range, instabilities have been reported to commonly develop in the impeller (rotor) or diffuser or both. The unsteady flow phenomena are believed to start from a localized flow separation (stall) that frequently will orbit within the stage at sub-harmonic rotational speeds (rotating stall). If not damped sufficiently the stall cells will eventually develop into more hazardous self-excited pressure oscillations within the entire compressor stage leading to surge phenomena that can induce high aero-elastic loads on the rotor itself leading to premature aging (fatigue) or ultimate failure of the stage. Predicting of the onset of the instabilities is a prerequisite to maintain compressor operating within safe operating margins. Nonetheless the physical understanding and associated modeling of the stall and surge inception is rather limited and mostly restricted to cause-and-effect investigations. With improved computational models being available nowadays more in-depth investigations of the underlying flow physics have become possible, but relies on high quality experimental data for validation.Following the statement of work put forth in the call for proposal, the first objective of the proposed project is to determine a surge inception scenario for a given academic as well as industrial reference case of centrifugal compressor using vaneless diffuser. Within the proposed project the off-design behavior of each compressor configuration will be investigated both numerically and experimentally, involving time-resolved Kulite array and PIV measurements. Based on this data and on existing theoretical analysis procedures, the second major effort of the present study is devoted to define low-order methodologies that ideally predict the onset of instabilities. Ámbito científico natural sciencesbiological sciencescell biology Palabras clave centrifugal compressor surge rotating instability measurments simulation theoretical analysis Programa(s) H2020-EU.3.4. - SOCIETAL CHALLENGES - Smart, Green And Integrated Transport Main Programme H2020-EU.3.4.5.6. - ITD Systems Tema(s) JTI-CS2-2015-CFP02-SYS-02-10 - Analysis of centrifugal compressor instabilities occurring with vaneless diffusor, at low mass flow momentum Convocatoria de propuestas H2020-CS2-CFP02-2015-01 Consulte otros proyectos de esta convocatoria Régimen de financiación IA - Innovation action Coordinador DEUTSCHES ZENTRUM FUR LUFT - UND RAUMFAHRT EV Aportación neta de la UEn € 747 375,00 Dirección LINDER HOHE 51147 Koln Alemania Ver en el mapa Región Nordrhein-Westfalen Köln Köln, Kreisfreie Stadt Tipo de actividad Research Organisations Enlaces Contactar con la organización Opens in new window Sitio web Opens in new window Participación en los programas de I+D de la UE Opens in new window Red de colaboración de HORIZON Opens in new window Coste total € 747 375,00 Participantes (1) Ordenar alfabéticamente Ordenar por aportación neta de la UE Ampliar todo Contraer todo STICHTING KONINKLIJK NEDERLANDS LUCHT - EN RUIMTEVAARTCENTRUM Países Bajos Aportación neta de la UEn € 355 083,75 Dirección ANTHONY FOKKERWEG 2 1059 CM Amsterdam Ver en el mapa Región West-Nederland Noord-Holland Groot-Amsterdam Tipo de actividad Research Organisations Enlaces Contactar con la organización Opens in new window Sitio web Opens in new window Participación en los programas de I+D de la UE Opens in new window Red de colaboración de HORIZON Opens in new window Coste total € 355 083,75