Skip to main content
European Commission logo print header

PLATInum group metals Recovery Using Secondary raw materials

Descrizione del progetto

Riciclare i metalli del gruppo del platino

I metalli del gruppo del platino (MGP) sono tra gli elementi più rari della Terra. Ampiamente utilizzato nell’industria automobilistica, in quella elettronica e nel settore minerario, il platino dispone di un’offerta che non è in grado di tenere il passo con l’odierna crescente domanda. Sebbene gli MPG possano essere recuperati da fonti secondarie, gli attuali metodi di riciclaggio sono caratterizzati da un’elevata intensità energetica e producono inquinamento. Pertanto, il progetto PLATIRUS, finanziato dall’UE, si propone di ricercare, progettare e convalidare tecnologie sostenibili e a basso costo per separare e recuperare gli MPG da convertitori catalitici e apparecchiature minerarie ed elettroniche di seconda mano. Il progetto valuterà e selezionerà le tecnologie più efficienti e convenienti, che saranno successivamente dimostrate e perfezionate. In definitiva, PLATIRUS offrirà alle industrie dell’UE un vantaggio competitivo aumentando l’approvvigionamento di risorse per creare nuovi prodotti sostenibili.

Obiettivo

The PLATIRUS project aims at reducing the European deficit of Platinum Group Metals (PGMs), by upscaling to industrial relevant levels a novel cost-efficient and miniaturised PGMs recovery and raw material production process. The targeted secondary raw materials will be autocatalysts, electronic waste (WEEE) and tailings and slags from nickel and copper smelters, opening-up an important range of alternative sources of these critical raw materials, with the potential to substitute a large amount of primary raw materials which are becoming more and more scarce in Europe.

For the first time five of the major research centres in Europe will collaborate in developing and fine tuning the most advanced recovery processes for PGMs. This joint effort will lead to a unique exchange of know-how and best practices between researchers all over Europe, aiming at the selection of the recycling process and the preparation of the Blueprint Process Design that will set the basis for a new PGM supply chain in the EU.
Two primary and secondary material producers with a consolidated business model will carry out validation of the innovative recovery processes in an industrially relevant environment by installing and testing them in an industrially relevant environment and benchmarking with the currently adopted recovery processes. A recycling company will provide a link to market introduction by manufacturing autocatalysts with second-life PGMs obtained via the PLATIRUS technology. Two large automotive companies will validate the material produced through the new recovery process, and ensure end-user industry driven value chains for recovered PGM materials. LCA, economic and environment assessment of the whole process will be led by a specialized consultancy company. Finally, the PLATIRUS project will be linked to European and extra-European relevant stakeholders, research activities and industries, with a solid dissemination, communication and exploitation plan.

Invito a presentare proposte

H2020-SC5-2016-2017

Vedi altri progetti per questo bando

Bando secondario

H2020-SC5-2016-OneStageB

Meccanismo di finanziamento

RIA - Research and Innovation action

Coordinatore

FUNDACION TECNALIA RESEARCH & INNOVATION
Contribution nette de l'UE
€ 1 508 508,02
Indirizzo
PARQUE CIENTIFICO Y TECNOLOGICO DE GIPUZKOA, PASEO MIKELETEGI 2
20009 DONOSTIA-SAN SEBASTIAN (GIPUZKOA)
Spagna

Mostra sulla mappa

Regione
Noreste País Vasco Gipuzkoa
Tipo di attività
Research Organisations
Collegamenti
Costo totale
€ 1 508 508,02

Partecipanti (12)