Objective The objective of the VALEMA project is twofold:- On the one hand it is required to manufacture and assembly units (EMAs and ECUs) previously designed and developed according to the JTI-CS2-2016-CFP03-SYS-02-14 Call (Development of electromechanical actuators and electronic control units for flight control systems) for in flight tests activities.- On the other hand it is required to perform certification activities regarding both the HW and SW of the ECUs in order to obtain a permit to fly in the FTB2 demonstrator of the Regional Aircraft.The manufacturing part will include a deep analysis of manufacturing routes, materials to be used and applicable qualification tests, searching for innovative processes, in order to ensure that the processes optimize the manufacturing time, minimize the raw material used and minimize the environmental impact.The certification activities will be aimed at obtaining the permit to fly from the applicable Airworthiness Authorities for the aileron/spoiler ECU HW design (according to DO-254) and for the aileron/spoiler ECU SW design (according to DO-178B).These activities can be considered as the last step within the HW and SW design of the aileron/spoiler ECU development to be undertaken in EMA4FLIGHT according to the JTI-CS2-2016-CFP03-SYS-02-14 Call and, as such, the innovations developed within that call also apply herein. Fields of science natural sciencescomputer and information sciencessoftwareengineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringcontrol systemsengineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraftmedical and health scienceshealth sciencesinfectious diseasesRNA virusesHIVengineering and technologyenvironmental engineeringenergy and fuels Keywords EMA Permit to Flight Programme(s) H2020-EU.3.4. - SOCIETAL CHALLENGES - Smart, Green And Integrated Transport Main Programme H2020-EU.3.4.5.6. - ITD Systems Topic(s) JTI-CS2-2016-CFP04-SYS-02-22 - Validation tests of electromechanical actuators and its dedicated control units at TRL 6 level Call for proposal H2020-CS2-CFP04-2016-02 See other projects for this call Funding Scheme IA - Innovation action Coordinator GMV AEROSPACE AND DEFENCE SA Net EU contribution € 260 137,50 Address CALLE ISAAC NEWTON PARQUE TECNOLOGICO DE MADRID 28760 Tres Cantos Spain See on map Region Comunidad de Madrid Comunidad de Madrid Madrid Activity type Private for-profit entities (excluding Higher or Secondary Education Establishments) Links Contact the organisation Opens in new window Participation in EU R&I programmes Opens in new window HORIZON collaboration network Opens in new window Total cost € 371 625,00 Participants (4) Sort alphabetically Sort by Net EU contribution Expand all Collapse all FUNDACION TECNALIA RESEARCH & INNOVATION Spain Net EU contribution € 61 512,50 Address PARQUE CIENTIFICO Y TECNOLOGICO DE GIPUZKOA, PASEO MIKELETEGI 2 20009 DONOSTIA-SAN SEBASTIAN (GIPUZKOA) See on map Region Noreste País Vasco Gipuzkoa Activity type Research Organisations Links Contact the organisation Opens in new window Website Opens in new window Participation in EU R&I programmes Opens in new window HORIZON collaboration network Opens in new window Total cost € 61 512,50 UMBRAGROUP SPA Italy Net EU contribution € 170 625,00 Address VIA VALTER BALDACCINI 1 LOCALITA PACIANA ZONA INDUSTRIALE 06034 Foligno Pg See on map Region Centro (IT) Umbria Perugia Activity type Private for-profit entities (excluding Higher or Secondary Education Establishments) Links Contact the organisation Opens in new window Participation in EU R&I programmes Opens in new window HORIZON collaboration network Opens in new window Total cost € 243 750,00 RAMEM SA Spain Net EU contribution € 230 125,00 Address CALLE SAMBARA 33 28033 Madrid See on map SME The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed. Yes Region Comunidad de Madrid Comunidad de Madrid Madrid Activity type Private for-profit entities (excluding Higher or Secondary Education Establishments) Links Contact the organisation Opens in new window Website Opens in new window Participation in EU R&I programmes Opens in new window HORIZON collaboration network Opens in new window Total cost € 328 750,00 SKYLIFE ENGINEERING SL Spain Net EU contribution € 60 112,50 Address CALLE AMERICO VESPUCIO N5, BLOQUE 1, LOCAL A 8-12 41092 Sevilla See on map SME The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed. Yes Region Sur Andalucía Sevilla Activity type Private for-profit entities (excluding Higher or Secondary Education Establishments) Links Contact the organisation Opens in new window Participation in EU R&I programmes Opens in new window HORIZON collaboration network Opens in new window Total cost € 85 875,00
