Obiettivo The project is aiming at a successful adoption of modern micro-electronic technologies in order to produce at a low price a highly reliable measurement device for medical applications. Its objective is to realize a miniaturized lactate biosensor unit and to simultaneously develop a suitable model manufacture methodology. The investigation work starts from the thick film technique for the electrode fabrication and ink-jet nozzle printing for sensor reagents deposition. The micro biosensor will be designed as a component for existing clinical measurement devices and will allow in combination with them for a reliable quantification of lactate concentration in human blood. At all stages, the biocompatibility of the sensor will be considered. It, however, is not the intention to use the micro biosensor in vivo within the timescale of this program, but this shall remain a long term aim. Campo scientifico engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensorsbiosensors Programma(i) FP3-MAT - Specific research and technological development programme (EEC) in the field of measurements and testing, 1990-1994 Argomento(i) Data not available Invito a presentare proposte Data not available Meccanismo di finanziamento CSC - Cost-sharing contracts Coordinatore Cranfield University Contributo UE Nessun dato Indirizzo Silsoe Campus Wharley End MK45 4DT Cranfield Regno Unito Mostra sulla mappa Costo totale Nessun dato Partecipanti (2) Classifica in ordine alfabetico Classifica per Contributo UE Espandi tutto Riduci tutto Herlev Universitet Hospital Danimarca Contributo UE Nessun dato Indirizzo Ringvejen 2730 Herlev Mostra sulla mappa Costo totale Nessun dato Nederlandse Organisatie voor Toegepast Natuurwetenschappelijk Onderzoek Paesi Bassi Contributo UE Nessun dato Indirizzo 97,Schoenmakerstraat 2600 JA Delft Mostra sulla mappa Costo totale Nessun dato