Obiettivo The low nitrogen content required for highly ductile steel grades (strips, bars, wire) is not usually achieved in conventional, 100% scrap-based EAF steel-making. The aim of the research is to establish the feasibility and the features of an industrial process for producing low nitrogen (50 ppm and less) steels in the EAF, using scrap as iron source, in adapting technologies, which are already available (coal/oxygen injections, arc setting, bath stirring, etc.). This new ability of the EAF will enlarge the production range of the short, steel recycling route towards higher grade steels without the need to import special iron sources (pre-reduced ore) which are not yet produced economically in Europe. Programma(i) ECSC-STEELRES 8C - Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995 Argomento(i) C1 - Primary steelmaking Invito a presentare proposte Data not available Meccanismo di finanziamento CSC - Cost-sharing contracts Coordinatore INSTITUT DE RECHERCHES DE LA SIDERURGIE FRANÇAISE Contributo UE Nessun dato Indirizzo Voie Romaine - BP 320 57214 MAIZIERES-LES-METZ CEDEX Francia Mostra sulla mappa Costo totale Nessun dato Partecipanti (2) Classifica in ordine alfabetico Classifica per Contributo UE Espandi tutto Riduci tutto ACENOR I+D Spagna Contributo UE Nessun dato Indirizzo Barrio Ugarte s/n 48970 BASAURI (VIZCAYA) Mostra sulla mappa Costo totale Nessun dato Rheinisch-Westfälische Technische Hochschule Aachen (RWTH) Germania Contributo UE Nessun dato Indirizzo Kopernikusstraße 16 52056 Aachen Mostra sulla mappa Costo totale Nessun dato