Objective In order to improve the surface quality of steel products and to achieve high-energy savings in hot rolling plants, it is necessary to control the atmosphere in each zone inside the reheating furnaces reliably. The aim of the planned research project is to develop an improved control system for the air-fuel ratio in each zone using combustion gas analysis and model- supported process control. Real-time determination of physical characteristics is also needed to adjust the global air-fuel-ratio of furnaces. A feed-forward strategy for improved control shall be developed. Quasi-simultaneous combustion gas analysis at multiple locations inside the furnace shall be installed. Combustion gas analysis shall be introduced step-by-step to improve control of the air-fuel ratio. Programme(s) ECSC-STEELRES 8C - Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995 Topic(s) D1 - Rolling: long products and reheating surfaces Call for proposal Data not available Funding Scheme CSC - Cost-sharing contracts Coordinator Verein Deutscher Eisenhüttenleute eV EU contribution No data Address Sohnstraße 65 40237 Düsseldorf Germany See on map Total cost No data Participants (1) Sort alphabetically Sort by EU Contribution Expand all Collapse all INSTITUT DE RECHERCHES DE LA SIDERURGIE FRANÇAISE France EU contribution No data Address Voie Romaine - BP 320 57214 MAIZIERES-LES-METZ CEDEX See on map Total cost No data