Objectif In order to improve the surface quality of steel products and to achieve high-energy savings in hot rolling plants, it is necessary to control the atmosphere in each zone inside the reheating furnaces reliably. The aim of the planned research project is to develop an improved control system for the air-fuel ratio in each zone using combustion gas analysis and model- supported process control. Real-time determination of physical characteristics is also needed to adjust the global air-fuel-ratio of furnaces. A feed-forward strategy for improved control shall be developed. Quasi-simultaneous combustion gas analysis at multiple locations inside the furnace shall be installed. Combustion gas analysis shall be introduced step-by-step to improve control of the air-fuel ratio. Programme(s) ECSC-STEELRES 8C - Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995 Thème(s) D1 - Rolling: long products and reheating surfaces Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur Verein Deutscher Eisenhüttenleute eV Contribution de l’UE Aucune donnée Adresse Sohnstraße 65 40237 Düsseldorf Allemagne Voir sur la carte Coût total Aucune donnée Participants (1) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire INSTITUT DE RECHERCHES DE LA SIDERURGIE FRANÇAISE France Contribution de l’UE Aucune donnée Adresse Voie Romaine - BP 320 57214 MAIZIERES-LES-METZ CEDEX Voir sur la carte Coût total Aucune donnée