Objectif This project concerns the construction of a demonstration pilot continuous casting machine for billets with assistance by ultrasonics either alone or in combination with other technologies (e.g. through-wall mould lubrication, modular ingot moulds). The primary objective is to improve as-cast product surface quality and the effects on the final product. Initial trials will concern spring steels. The project will be carried out in two stages: first the design and construction of the prototype ingot mould or moulds and, secondly, industrial testing. The effect of ultrasonics used either alone or in combination with other technologies will be quantitatively evaluated by inspection of the surface quality of products and by measuring various parameters such as the frictional force between product and mould, heat transfer in the mould. Programme(s) ECSC-STEELDEM 3C - Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995 Thème(s) T2 - Continuous casting Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur Aciers d'Allevard Contribution de l’UE Aucune donnée Adresse Le Cheylas 38570 Goncelin France Voir sur la carte Coût total Aucune donnée Participants (3) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire INSTITUT DE RECHERCHES DE LA SIDERURGIE FRANÇAISE France Contribution de l’UE Aucune donnée Adresse Voie Romaine - BP 320 57214 MAIZIERES-LES-METZ CEDEX Voir sur la carte Coût total Aucune donnée KABELMETAL France Contribution de l’UE Aucune donnée Adresse 141/145 rue Michel Carré 95105 ARGENTEUIL CEDEX Voir sur la carte Coût total Aucune donnée KABELMETAL Allemagne Contribution de l’UE Aucune donnée Adresse Klosterstrasse, 29 4500 OSNARBRUCK Voir sur la carte Coût total Aucune donnée