Objetivo The main objective is to develop a highly productive strip casting process for any steel grade, which can produce hot strip of a quality which is as good as or better than that of conventional strip produced today, and which has the economical advantages of the near net shape casting process. The process consists of a single belt caster with in-line rolling to allow for the minimum hot reduction required to produce strip from low carbon steel grades.One advantage of this is the high productivity rate achieved when casting strip of 5 to 15 mm in thickness. Another advantage is the possibility of in-line rolling with hot reduction to improve the structure and to eliminate geometrical defects. Programa(s) ECSC-STEELDEM 3C - Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995 Tema(s) T2 - Continuous casting Convocatoria de propuestas Data not available Régimen de financiación Data not available Coordinador MEFOS, FOUNDATION FOR METALLURGICAL RESEARCH Aportación de la UE Sin datos Dirección Aronstorpsvägen 1 971 25 LULEÅ Suecia Ver en el mapa Coste total Sin datos
