Objectif A highly mechatronic, computer controlled feedback injection control system was developed which gave increased levels of speed at lower pressures whilst maintaining precise control over mixing conditions and flow. The development of the generic injection technology was in a form capable of dealing with the processing requirements associated with high and low performance resin systems and fibre packs. The project was split into nine major technical tasks to look at critical performance definition representing three market areas, resin selection, reinforcement selection and development, development of process monitor systems and mechatronic control, resin injection equipment development, evaluation of material selected and equipment development, material performance characterisation, material type specific development and practical validation. It was concluded that increase levels of speed at lower pressures whilst maintaining precise control over mixing conditions and flow can be met using the developed highly mechatronic, computer controlled feedback injection control system. The design based on a modular design allowed the optimised injection technology to be validated on three industrially relevant application categories representing different market sectors. Other conclusions were made regarding the technical and economical viability, based on the work undertaken on the industrial practical validation of the three industrially relevant applications. The project has proved the potential of the developed intelligent resin injection system, each application not only satisfying the relevant performance definition, but also offering significant cost and/or weight advantages. Cost savings of up to 40% with similar or greater technical performances have been demonstrated. Champ scientifique engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringcontrol systems Programme(s) FP3-CRAFT - Specific programme of research and technological development in the field of industrial and materials technologies - CRAFT -, 1990-1994 Thème(s) Data not available Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur PRODUCTION ENGINEERING RESEARCH ASSOCIATION - PERA Contribution de l’UE Aucune donnée Adresse Technology Centre, Nottingham Road LE13 0PB MELTON MOWBRAY Royaume-Uni Voir sur la carte Coût total Aucune donnée Participants (1) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire Aerospace Composite Technologies Ltd Royaume-Uni Contribution de l’UE Aucune donnée Adresse Airport Road LU2 9NQ Luton Voir sur la carte Coût total Aucune donnée