Objective The following substrate materials have been painted: polypropylene, a wood core covered with SMC, homogeneous SMC and polyamide. Optimized processes have been presented in lab scale in three of the four cases. One of the most important things have been that is was possible to engage and convince suppliers to make developments for the different proposers. The most important are the improvement of the performance of the low-curing epoxy powders, the development of a new waterborne conducting and adhesion promoting liquid and that a work has started to improve the conductive IMC primer. This development work would not have been started if the initiative had come from one of the SME without the project back up. Fields of science humanitiesartsvisual artsagricultural sciencesagriculture, forestry, and fisheriesforestry Programme(s) FP3-CRAFT - Specific programme of research and technological development in the field of industrial and materials technologies - CRAFT -, 1990-1994 Topic(s) Data not available Call for proposal Data not available Funding Scheme CSC - Cost-sharing contracts Coordinator Swedish Institute of Production Engineering Research EU contribution No data Address 30,Argongatan 431 35 Mölndal Sweden See on map Total cost No data Participants (1) Sort alphabetically Sort by EU Contribution Expand all Collapse all CEPA STAALPRESSNINGS AB Sweden EU contribution No data Address 25,Maasvaegen 25 227 33 LUND See on map Total cost No data