Objetivo The objective is to develop environmentally friendly and industrially acceptable tannin adhesives for wood products of little or no formaldehyde emission.The project envisages the investigation of a series of hardening systems and their reactions for tannin suitable for wood adhesives. These are based mainly on the catalytically induced autocondensation of polyflavonoid tannin couples to a series of different hardeners. From this study, a series of low formaldehyde emission, or in the best case of no-formaldehyde emission adhesive formulations based on natural products will be obtained. These will be extensively tested at laboratory and pilot plant levels on products such as wood particleboard, plywood, laminated timber and fingerjoints. Ámbito científico natural scienceschemical sciencesorganic chemistryaldehydesagricultural sciencesagriculture, forestry, and fisheriesforestry Programa(s) FP4-FAIR - Specific research, technological development and demonstration programme in the field of agriculture and fisheries (including agro-industry, food technologies, forestry, aquaculture and rural development), 1994-1998 Tema(s) 1.3.2 - Wood products Convocatoria de propuestas Data not available Régimen de financiación CSC - Cost-sharing contracts Coordinador UNIVERSITE DE NANCY I Aportación de la UE Sin datos Dirección RUE DU MERLE BLANC, 27 - B.P. 1041 88051 EPINAL CEDEX 9 Francia Ver en el mapa Coste total Sin datos Participantes (2) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo BAKELITE A.G. Alemania Aportación de la UE Sin datos Dirección VARZINER STRAßE, 49 47138 DUISBURG-MEIDERICH Ver en el mapa Coste total Sin datos Silva Srl Italia Aportación de la UE Sin datos Dirección Via Torre 7 12080 San Michele Mondovi Ver en el mapa Coste total Sin datos
