Obiettivo The objective is to develop environmentally friendly and industrially acceptable tannin adhesives for wood products of little or no formaldehyde emission.The project envisages the investigation of a series of hardening systems and their reactions for tannin suitable for wood adhesives. These are based mainly on the catalytically induced autocondensation of polyflavonoid tannin couples to a series of different hardeners. From this study, a series of low formaldehyde emission, or in the best case of no-formaldehyde emission adhesive formulations based on natural products will be obtained. These will be extensively tested at laboratory and pilot plant levels on products such as wood particleboard, plywood, laminated timber and fingerjoints. Campo scientifico natural scienceschemical sciencesorganic chemistryaldehydesagricultural sciencesagriculture, forestry, and fisheriesforestry Programma(i) FP4-FAIR - Specific research, technological development and demonstration programme in the field of agriculture and fisheries (including agro-industry, food technologies, forestry, aquaculture and rural development), 1994-1998 Argomento(i) 1.3.2 - Wood products Invito a presentare proposte Data not available Meccanismo di finanziamento CSC - Cost-sharing contracts Coordinatore UNIVERSITE DE NANCY I Contributo UE Nessun dato Indirizzo RUE DU MERLE BLANC, 27 - B.P. 1041 88051 EPINAL CEDEX 9 Francia Mostra sulla mappa Costo totale Nessun dato Partecipanti (2) Classifica in ordine alfabetico Classifica per Contributo UE Espandi tutto Riduci tutto BAKELITE A.G. Germania Contributo UE Nessun dato Indirizzo VARZINER STRAßE, 49 47138 DUISBURG-MEIDERICH Mostra sulla mappa Costo totale Nessun dato Silva Srl Italia Contributo UE Nessun dato Indirizzo Via Torre 7 12080 San Michele Mondovi Mostra sulla mappa Costo totale Nessun dato
