Objective The aim of the project is to develop a cost-effective system for on-farm electricity generation based on an indirectly heated gas turbine cycle operating on biomass fuels.Specific objectives are :- to market survey the demand for small-scale 50-250 KW on-farm electricity generation / CHP systems in relation to use of energy crops in participating European countries and the potential markets in Europe and world-wide for European manufactured equipment;- to assess the economics of an on-farm generating systems using an indirectly fired gas turbine plant;- to establish the technical aspects relating to the modification and heat exchanger development;- to carry out a value engineering study to determine the optimal parameter for the system;- to develop a specification and detail design for costing an experimental system; Under current CAP legislation, large amounts of the most productive arable land in Europe are to be taken out of food crop production. Some of this could be used for growing fuel for electricity production. At present the market value of wood chips for fuel is too low to be viable for a large number of producers unless the value is added to the woodfuel on the farm, i.e. electricity production could be farm based. Few reliable technologies are suitable at the small scale but the indirectly fired turbine is a solution to this problem. Most of the components are available but will require somemodification and development work. The turbine, compressor, furnace and low temperature recuperator would be derived from existing technologies.The potential for self-production and sale of the electricity to the distribution grid, or directly to local consumers, would be examined. The project will include a study of the scope for use of the electricity and waste heat on the farm or by local agricultural and industrial consumers. A detailed study of the thermodynamic variables for various turbine-engine configurations will be made in order to establish an optimal thermodynamic cycle based on technical and economic criteria. Laboratory work on ash fouling of heat exchanger surfaces at high temperature, will be required. The study will provide a design and economics of a demonstration plant to be used on a farm. Fields of science social scienceseconomics and businesseconomicsengineering and technologyelectrical engineering, electronic engineering, information engineeringelectrical engineeringpower engineeringelectric power generationcombined heat and poweragricultural sciencesagriculture, forestry, and fisheriesagricultureengineering and technologyenvironmental engineeringenergy and fuelsagricultural sciencesagricultural biotechnologybiomass Programme(s) FP4-FAIR - Specific research, technological development and demonstration programme in the field of agriculture and fisheries (including agro-industry, food technologies, forestry, aquaculture and rural development), 1994-1998 Topic(s) 1.1.2 - Processing of raw materials Call for proposal Data not available Funding Scheme CSC - Cost-sharing contracts Coordinator BTG BIOMASS TECHNOLOGY GROUP B.V. EU contribution No data Address DRIENERLOLAAN 5 - P.O. BOX 217 7500 AE ENSCHEDE Netherlands See on map Total cost No data Participants (4) Sort alphabetically Sort by EU Contribution Expand all Collapse all DK - TEKNIK Denmark EU contribution No data Address GLADSAXE MOELLEVEJ, 15 2860 SÖBORG See on map Total cost No data James Eng. Ltd United Kingdom EU contribution No data Address 5 St Johns Road BS21 7TG Clevedon See on map Total cost No data KEMA NEDERLAND B.V. Netherlands EU contribution No data Address UTRECHTSEWEG, 310 6812 AR ARNHEM See on map Total cost No data Natural Resources Institute United Kingdom EU contribution No data Address Central Avenue Chatham Maritime ME4 4TB Chatham See on map Links Website Opens in new window Total cost No data